Ok, I got rid of my camaro a while ago, and it's going to be a loooong time before I get another one. I had these parts on my camaro for somewhere between 500-1000 miles.

T5 Trans - Don't know how many miles, works as it should. Not sure if WC or Non-WC. The front seal had a slight leak, I planned on fixing and reinstalling, so I bought a new seal. Never reinstalled trans. 26 spline for V8.

Centerforce DF Clutch, Pressure Plate, and Throw-out Bearing - 500-1000 miles, I bought new

Billet Steel Flywheel - 500-1000 miles, Bought from someone on this board, was brand new when I installed. Don't know if SFI is the brand or what, but it says SFI, and SPEC 1.1, B 082695

Pro 5.0 Shifter - Bought New, will include a GM shift ****

Bellhousing - Fair condition, may need to enlarge one or two holes and re-tap

Other parts include - torque arm, crossmember, clutch fork, shift plate w/boot (not very good condition, but it will work), an extra shifter that looks like it's been modified, I think I'll be able to find the bolts for the flywheel & pressure plate, too.

Parts you will need (that I can think of off the top of my head) - Master/Slave cyl, Pedals, Pilot Bearing.

I'm looking to get $1000 firm + shipping out of these parts. PM me if interested,
Kyle

 

PM sent...

 

ill give you a hurst plus cash for the pro 5.0?

 

I don't have the need for anymore parts right now, as I don't have an f-body any more. I'm going to give this a few more days to try and sell all of my items at once, then I'll put a price up for each individual piece.

 

how much for just the Pro 5.0? when you decide to sell individual pieces

 

I may be interested in the clutch, plate, and throw-out if you split up

 

I'll list individual prices this weekend or monday if they don't sell at once. Whoever showed interest first will get first dibs.

 

Is it an aftermarket torque arm or the stock one?

 

torque arm is stock, so is the crossmember.

 

put me in for the pro 5.0 if the other guys fall though.

 

Ok here's the prices-
T5 - $300 + shipping (new front seal included)
Centerforce Clutch/Pressure Plate & Throwout Bearing - $250 + shipping
Pro 5.0 W/GM shift **** - $150 + shipping
Billet Steel Flywheel (for 1 pc rms) - $100 + shipping
Bellhousing - $50 + shipping
If anyones interested in any of the other parts, make an offer.
I'm located in Bartlett, IL (60103 area code) in case anyone wants to pick parts up, or look up about what shipping would cost.

 

Do you have the tranny mount?

 

The trans mount goes w/the trans, unless you mean the crossmember, which would be $20 + shipping.