TTA / 3.8 Turbo parts
Guest
Posts: n/a
TTA / 3.8 Turbo parts
I have pretty much everything to make a TTA, sans the large parts... engine, trans, turbo, downpipe. I have:
ECM
wiring
some sensors and relays
DIS, bracket, plug wires
throttle bracket and cables
plastic vacuum lines
accessories, pulleys
oil cooler
intercooler (has a fan attached), intercooler shroud (poor condition), intercooler bracket
turbo bracket
headers (decent shape, did not see any cracks)
crossover pipe (little dented up)
inlet pipes (pretty sure at least one is not original)
K+N air filter (poor condition)
various brackets
ac parts and hard lines
fuel lines
frame pads (for motor mounts)
trans x-member and rubber mounts
gauges
cruise brackets and lines
and some other various parts like a valve cover (just one), a plenum spacer, fan, VSS, coolant reservoir heat shield, turbo heat shield.
If you read all that, I'm selling this stuff because I am just not going to have the time to undertake this project anytime even remotely close to soon. With an engine, your choice of heads, intake, downpipe, and transmission you'd have just about all the parts you would need to complete the project. Contact me if you're seriously interested and we'll discuss price. It cost quite a bit to get all this (if you've looked around you know what these parts go for) so I wont be giving it away. Right now I'm not interested in separating the parts.
I'm located in Southern California.
ECM
wiring
some sensors and relays
DIS, bracket, plug wires
throttle bracket and cables
plastic vacuum lines
accessories, pulleys
oil cooler
intercooler (has a fan attached), intercooler shroud (poor condition), intercooler bracket
turbo bracket
headers (decent shape, did not see any cracks)
crossover pipe (little dented up)
inlet pipes (pretty sure at least one is not original)
K+N air filter (poor condition)
various brackets
ac parts and hard lines
fuel lines
frame pads (for motor mounts)
trans x-member and rubber mounts
gauges
cruise brackets and lines
and some other various parts like a valve cover (just one), a plenum spacer, fan, VSS, coolant reservoir heat shield, turbo heat shield.
If you read all that, I'm selling this stuff because I am just not going to have the time to undertake this project anytime even remotely close to soon. With an engine, your choice of heads, intake, downpipe, and transmission you'd have just about all the parts you would need to complete the project. Contact me if you're seriously interested and we'll discuss price. It cost quite a bit to get all this (if you've looked around you know what these parts go for) so I wont be giving it away. Right now I'm not interested in separating the parts.
I'm located in Southern California.
Last edited by madmax; Jul 6, 2007 at 12:08 AM.
Trending Topics
Member
Joined: Sep 2006
Posts: 345
Likes: 0
From: oviedo, FL
Car: '91 RS
Engine: 5.0L gross *** tbi
Transmission: 700r4
Axle/Gears: 2.73
Re: TTA / 3.8 Turbo parts
your only allowed to have 3 attached images per thread....(the mods are gonna tell you) so use photobucket or another site like that for the rest of the pics
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM
