I have a whole wad of F-body stuff to sell.

I had my torque arm already listed but I'll say it again, tubular double adjustable chrome moly arm, floor pan mount like new $225

Harwood bolt-on 4" cowl hood, never painted, just faded gelcoat $300

Moser bolt-in 9", torque arm mounts, 31 spline axles, disc brakes, will either come with a 3.90 or 4.56 gear on a spool. Looking for around $1500 complete, may sell without center section for $400 less

Bolt in SFC's for 82-92. Don't recall brand and they've never been fitted or out of the box. $100

Hooker shorty headers for 3rd gen car. Great shape, also have a true dual setup for it with spintecs, x-pipe and tailpipes that run under the rearend. Can't use on new ride $300 for the whole setup.

I'm in Pensacola and most of this stuff is HUGE either in size or weight. Have a few pics but not good ones. Prefer to meet within a few miles but don't want to ship it. Too much work and hassle. Thanks

 

Pics of the SFCs and do they clear OEM exhaust?

 

P'cola eh? I might have seen you driving around once or twice. Whereabouts do you live? I'm right near the I-10 over pass near Dairy Queen.

Anywho, what brand headers and how is ground clearance with the exhuast. I might be interested in the setup or just the headers. Let me know.

 

I live off of Kingsfield and Chemstrand. I doubt you'veseen the car. Only been out a handful of times in the last five years. I think I've driven it maybe 300 miles. It's a true garage queen. I'm going to end up selling it too I think. I'm going to put my LS1 in an S10 instead.
The headers are Hooker competition series, the exhaust all looks new except the huge tailpipes I never liked anyway. This system came off of a car in Panama City and I never got to run it. Sounded wckd though with the spintecs.
----------
SFC's are still in the box....I guess I can take pics of the box.......

 

got a pic of the hood? I live in south florida...

 

sorry, the hood sold yesterday........ still have a built bolt-in 9"($1500), bolt-in SFC's(still in the box new) $250, shorty headers with true dual exhaust(spin-tecs), th350 with truck internals and a TCI full manual forward pattern valve body(worked fine when pulled) $150, tunnel-mount torque arm $225 , weld-in LCA relocators $75 and probably some more stuff on top of that. I'm still not going to ship the big stuff. I'll hit a Super Chevy or go to Moultrie before I ship the big parts.

 

Cool I live in Navrre we should get up go to holt one Friday night

 

I was at Holt last weekend for the real street race. I'm there all the time...... just look for "batman" Since you're so close you need to come get some of this stuff. I need it to go away so I can start on my other toy. You from Hurleburt?

 

my stuff still needs to go away!!

 

Hi, Just wondering what you have left,and prices. Thanks Eric

 

so far have only sold the hood. Still have a complete bolt-in 9"(moser) $1500, th350 with truck internals and a TCI forward pattern manual valve body $150 true dual exhaust with shorty hooker headers, x pipe and spintec mufflers with under the axle tailpipes $300, tunnel-mounted double adjustable torque arm $225, bolt-in SFC's(not sure what brand and never out of the box) $100 weld-in BMR LCA relocators still in plastic wrap $75 nothing else right off hand but may fall into some other stuff as I clean out. Still won't ship anything as it's just not worth the hassle to me with my work schedule. May help with some delivery for fuel costs within a few hundred miles of Pensacola. Thanks for asking......

 

I'm interested in some parts I'm in so fla when is moultrie?

 

I'm not sure what weekend Moultrie is yet.....I guess I should check. I have drill on the 12th and 13th so that weekend is out. Other than that my weekends are free unless we start flying a storm. Storm season is my busiest time of the year(although our other deployments are starting to spool up too) I have several folks interested in stuff but no cash in hand yet(imagine that...dreams without budgets!) I told another guy I'd do a package deal to sell as much as possible and will try to help with delivery within a few hundred miles....just help me with fuel costs.

 

I work on there im a GS 6 i spent 5 year in the army

 

you on the GCM site?? Looks familiar........... wish I was working at Hurby. This driving is getting pricey!!

 

up again for today......

 

If you change your mind on shipping I may be interested in the SFC's if I can get some pictures.

 

bump for tooooooodaaaaaayyy!! To maybe help things out a bit, I'll help with delivery as far as Jackson Ms, Atlanta Ga, Lake City Fl and Baton Rouge La for the cost of fuel. I really want to make this stuff go away so I can get moving on my other project. Thanks.........

 

Do you still have the headers and pipes. If so could you pm me the information about them. Types, sizes, etc.

 

are sfc still for sale? how much with shipping to 77840? if still for sale

 

pics of rearend and sfc's and are they weld in or bolt in I'm in fla

 

sorry but I decided to go ahead with my build on the car. I can't delete the whole post or I would!! Thanks for asking though. This stuff would have been a great deal if somebody had snatched it all up quick. I finally got pissed enough at the car to abuse it. Even got most of my fuel system plumbed this week....woo-hoooo...progress!!

 

hey thats cool a true motorhead does that kind of stuff every now and then lets see some pics when its done

 

i know the feeling.........i am keeping my car for now,til i get the other body ready to swap all my parts to.did you have an add for the rear posted on dragcoverage.com?

 

yep, that was all my stuff. The only thing I sold that I'm glad about was the hood. That 4" cowl was just too much. I'm going to do a jongbloed 2" cowl instead. I think it sets the lines of the car better.

 

I HAVE A 2 IN HARWOOD BOLTON ON MY CAR.........ITS MAKES A LOTTA DIFFERENCE.LOL