I am selling a 377ci stroker engine and a built TH400 from a camaro my friend just bought. Here are the specs:

Dart 400 Block
1000 CFM Holley double pumper carbeurator
Brownfield or AFR heads(I'm not sure)
Steel 4340 crank/3500 stroke
Forged aluminum dome/Keith Black .080 Pistons
Six inch Bullet connecting rods
Titanium valves .080 bored
Intake: 212.5 Exhaust: 1.60
Pushrods: 7994 Comp Cams 7.95
Full roller lifters
13:1 COMPRESSION
7qt oil pan/high volume oil pump

TH400 Built transmission
Manual valve body
MAYBE a transbrake installed
3500 stall converter

All of this is what the guy told us who he bought it from. The car sounds incredibly mean, but I do not know the extent of the condition of the parts other than the tranny. He wants the car to be a street car, so this setup has to go. The tranny is definitely a built tranny also.

We are loking to get $5000 for everything together, which is about what the block ALONE costs...

Located in Chelmsford, MA 01824

Call me 978-758-9947 with any questions or email sk8runeg@gmail.com

Thanks
-Scott

 

Is it an aluminum block?

 

As far as i know it is an aluminum block

 

I'm not clear on the block. Is it a Dart iron block or Aluminum? Also, it looks like this was bored .080" over. Is that true? Bore would be 4.205".

Any specs on the cam?

 

Dart makes both cast iron and aluminum blocks.

 

3.5" stroke x 4.145" bore =377.8
only .020" over not .080"

 

how much for the tranny shipped to 73115???