Borg Warner 9 bolt and other 3rd gen parts
#1
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Borg Warner 9 bolt and other 3rd gen parts
Rebuilt posi unit new cones and springs etc. Motive 3:70 gears. complete rear. without disc brakes $325 with $400. Steel goodmark Cowl hood. Slightly damaged during shipping Can easilly be fixed- asking $170.Rebuilt 700R4 transmission with corvette torque convertor $300. TCI manual valve body used once $200. Many other parts that have to go! Prefer pickup in Ct.
#2
Member
iTrader: (6)
Join Date: Jul 2005
Location: Northern Kentucky
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am GTA, 2003 Grand Am GT
Engine: 350 Tune Port
Transmission: 700R4
Re: Borg Warner 9 bolt and other 3rd gen parts
Would you ship the entire rear to 41005? If so, what would the cost be?
#5
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
I'm pretty sure that shipping the whole rear would cost a fortune. However I,m willing to ship parts off the rear. I will let the posi unit go for $150 plus shipping and the gear set go for $175. But if you want the package deal I'll take $300 FOR BOTH. It would be a heluva lot cheaper to ship. for the axles I'll take $25 each plus shipping. This stuff has got to go!
#7
Re: Borg Warner 9 bolt and other 3rd gen parts
Did you rebulid the rearend or did you have someone else do it? How many miles have you put on it? Is it still all together, or is it apart?
Trending Topics
#8
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
Danbury Ct. 06810 is where i'm located.
#9
Junior Member
Join Date: Nov 1999
Location: Jacksonville, Fl
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Re: Borg Warner 9 bolt and other 3rd gen parts
Do you still have this rear end??? was it professionaly rebuilt?? I will pay shipping to jacksonville, Fl 32217 please let me know thanks
#10
Junior Member
Join Date: Sep 2004
Location: rochester, ny
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: 350
Transmission: t5
Re: Borg Warner 9 bolt and other 3rd gen parts
was the rear ran? silent? shipping qoute on complete rear to hilton, ny 14468 -thanks
#11
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
rear is currently not together. I was looking to part it out. I would be able to ship the parts out of the rear. Or if someone wants to pick up the complete rear from me they can assemble it. It is to much of a hassle to ship the complete rear. I had the rear in my car. The posi unit was rebuilt and worked great, the gears are motive 3:70's which did make a slight whine when driving on the highway, I beleive they made noise because they were not shimmed properly. Upon disassembly there is no damage to gears or bearings in the rear. everything is fine the rear just needs to be set up properly. I don't want to pay somebody again to find out that it is still not right, Thats why I want to get rid of it and buy a moser rear which is already assembled and warranted. I'm done screwing around and paying people a lot of money for nothing.
#12
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
I got my moser rear and I really need to get rid of all the 9 bolt stuff! I have a 9 bolt housing, rebuilt 3 series posi carrier, various ring and pinion sets, axles, rear disc setup. I also have a complete factory 3:45 9 bolt rear that is in my car right now that is unmolested with a good working posi, I would like to get rid of this too for $300 plus shipping. I am taking offers on all the other 9 bolt stuff. There are things that I hav'nt listed so feel free to reply with what you may need for a 9 bolt. I need to get rid of this stuff!
#14
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
sorry the hood has been sold, thanks for inquiring though.
#16
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
9 bolt posi carrier SOLD thanks 82iroc. Still have all other 9 bolt parts and open to offers within reason. have a barely used 3:70 gear set $150 INCLUDING SHIPPING. 9 BOLT AXLES, yokes factory rear disc setup etc...
#17
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
still for sale
I got my moser rear and I really need to get rid of all the 9 bolt stuff! I have a 9 bolt housing, rebuilt 3 series posi carrier, various ring and pinion sets, axles, rear disc setup. I also have a complete factory 3:45 9 bolt rear that is in my car right now that is unmolested with a good working posi, I would like to get rid of this too for $300 plus shipping. I am taking offers on all the other 9 bolt stuff. There are things that I hav'nt listed so feel free to reply with what you may need for a 9 bolt. I need to get rid of this stuff!
rear is currently not together. I was looking to part it out. I would be able to ship the parts out of the rear. Or if someone wants to pick up the complete rear from me they can assemble it. It is to much of a hassle to ship the complete rear. I had the rear in my car. The posi unit was rebuilt and worked great, the gears are motive 3:70. Everything is fine the rear just needs to be set up properly. I don't want to pay somebody again to find out that it is still not right, Thats why I want to get rid of it and buy a moser rear which is already assembled and warranted. I'm done screwing around and paying people a lot of money for nothing.
#19
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
Yes I have a 370 set and a 327 set. pm me if your serious about purchase.
#20
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
Update on parts for sale. 3:27 gear set $100 shipped. 3:70 gear set $150.00shipped. within the U.S. TCI manual valvebody pn# 376010 for 700R4 with lockup capability. used once, back in original box will sell for $175 shipped within the U.S. I do accept paypal.
#21
Member
Thread Starter
iTrader: (3)
Join Date: Feb 2006
Location: Danbury Ct
Posts: 115
Received 0 Likes
on
0 Posts
Car: 87 iroc
Engine: 5.7 ZZ4, AFR, Stealth Ram, Comp cam
Transmission: 1993 T56 viper internals w Spec3+
Axle/Gears: moser 9" truetrac 3:89
Re: Borg Warner 9 bolt and other 3rd gen parts
9 bolt rear axle housing disc brake rear with differential cover. Pick it up for free! in Ct. Housing Only!! if you want the axles $25 each.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
09-17-2020 08:26 AM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
08-08-2015 08:16 PM