Pennocks91ws6

IN CANADA

just got a couple things done on my motor and turned out with a junk block, now have to sell :

its from a 91 formula t.p.I

sandblasted rods (need resizing, can do for 100 bux. arp rod bolts avail too)
20 + shipping, more with bolts and resizing
stock cam, (im told it was the same as the 350)
30 + shipping
heads, decked, blasted, cut, new sprigns and retainers, painted fully assembled never used, 3 angle valve job completly rebuilt comes with head gasgets, exhaust gasgets, self aligning rockers , pushrods. and intake gasgets .hell of a deal! .30 i belive was off the deck of the 55 cc heads
200, o.b.o + shipping
good way to bump compression, exelent for t.b.i guys
8 injectors, 19 ponders i belive was the stock number
30 for set +shipping
exhaust manifolds with AIR
15 + shipping
stock dual cat Y pipe
15 + shippin
used timing chain
offers

ask about any other thing related to my 305,

Pennocks91ws6

also got some swirl port heads, blasted, tanked, resurfaced, 1.60 exhaust, 1.90 intake, undedrcut race valves, bassically complety new heads, viton seals, good for 550 lift and 380 ish horse, never used 400 o.b.o

i also have a COMPLETE T.P.I system from my 91 formula, its been completly blasted, im poslishing the runners right now, comes with
intake base, polished runners, 8 19 pound injectors, fuel rails, egr valve, plenum, throttle body , harness, various sensors, and even a k and n filter,
im asking 500 o.o on that
it is also , bassically a brand new t.p.i system
fully reconditoned

pictures availible

Pennocks91ws6

bump
trades considered
swirl port heads availible open to offers
manley valves
i think 120 # at the seat
undercut
machined
painted

also got a almost new 650 holley avenger in box
vac sec, elec choke
asking 200 o.b.o
got a working oil pump and pan for a 1 peice also. offers

jamez74

iTrader: (1)

pm sent

Pennocks91ws6

bump

free stock 4 barrel , i think its rochester, comes with the holley

Pennocks91ws6

these are the 350 heads

Pennocks91ws6

forgot to say the 305 heads are fully assembled for $200, trades considered
ill throw in gasgets for a trade or offer, because the gasgets and selas were almost 200 themselve,, let alone the $350 in machining and the core charge,, blah blah. 200 for new heads seems extremly resonable

deal pending

Bo1226

iTrader: (2)

What size valves do the 305 heads have? What casting are the heads? Do you know how much shipping would be to Auburn KS 66402. Would these heads work on 83 305 w/comp cam xe268, carb motor?

Pennocks91ws6

14101081 is the casting,, but the deal is pending with a fellow canadian buddy,, you have seconds if he backs out,



rocker arms, exhaust gaskets, and intake gaskets not pictured, but are included

Pennocks91ws6

TTT
i really am interested in trade for aluminum or vortec heads, or a 650- 750 mech secondary carb, dual plane intake,, or long tube headers
or clutch