85 TPI Wiring Harness, ECM and Custom Chips
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
85 TPI Wiring Harness, ECM and Custom Chips
I have a 1985 TPI Harness in very good condition. Uncut with most of the sensors including the mass air flow meter and two ECMs. Supposedly one has a Super Chip, which I haven't verified, and the other is bone stock. I have a custom chip by
www.tpichips.com
which I never installed. It is for a 350 with a 500 lift, 210 duration, 112 LSA camshaft, headers, catback, and Vortec heads.
$90 plus shipping.
www.tpichips.com
which I never installed. It is for a 350 with a 500 lift, 210 duration, 112 LSA camshaft, headers, catback, and Vortec heads.
$90 plus shipping.
Member
iTrader: (5)
Joined: Aug 2006
Posts: 311
Likes: 1
From: Stafford, Connecticut
Car: 87 Iroc
Engine: modified 350
Transmission: high performance built 700R4
Axle/Gears: Strange S60 3:73
Re: 85 TPI Wiring Harness, ECM and Custom Chips
I will take the parts if they are for an automatic. Thanks Steve.
Last edited by Steve Mack; Dec 29, 2007 at 12:06 PM. Reason: add info
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Sorry, Steve. It's from a T5 car.
Re: 85 TPI Wiring Harness, ECM and Custom Chips
I dont need the custom chip so keep it but would take the 85 TPI Harness and ecms for $90 plus shipping zip 60004, lmk
Last edited by IrocZ85; Dec 29, 2007 at 05:06 PM. Reason: dont need the custom chip
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
This harness if for a T5 car. IROC, if that's what you need. The parts are yours. Let me know.
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
To the top..........
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Sorry for not getting back with you right away but I was trying to make sure its a tuned port wiring and ecms, pretty sure the ecm # is 1226870 (should be at least Im pretty sure and are the burn off modules on the ecms, LMK because if so its perfect as Im putting a 85 tuned port engine and 5spd in a 90 rs right now and just want to make sure it will work right, please lmk
Trending Topics
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Sorry for the delay in answering. My daughter is back from college for the holidays. She borrowed my truck to visit friends and the harness was behind the seat. Yes, one ECM is 1226870. The other is out of my old 1986 Vette. It won't work for your swap but your welcome to it. I thought I had an extra 1226870 from my 1985 IROC but I remember now that I didn't pull it out before I sold it. I sold it carbed. The 1226870 that I'm sending you works great though. I'll let the complete set-up go for $75 plus shipping since I didn't have an extra 1226870.
Junior Member
iTrader: (1)
Joined: Feb 2005
Posts: 89
Likes: 0
From: southeastern Wa.
Car: 89 RS.. 91 1/2ton 1500
Engine: 305 tbi
Transmission: 5 speed manual
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Would you take 50 shipped for just the harness & sensors. No MAF or ecm's
mrtater
mrtater
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Deal Sounds goo with me for the wiring harness and both ecms plus the maf flow, just get me a shipping cost to 61201 and lmk if you take paypal or if I need to send a money order, LMK
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
I'll box it today and get that shipping information as soon as I can.
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
IrocZ85,
You have a PM.
You have a PM.
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Looks like these are available again. To the top...
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Anyone.....?
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Sorry it took me so long to get back with you but if you still have these lmk and Ill send payment as I just got the money transfered into paypal
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Still got it. Do you still have my PayPal address?
Thread Starter
Joined: Feb 2003
Posts: 1,229
Likes: 5
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: 85 TPI Wiring Harness, ECM and Custom Chips
Iroc,
Should I use the PayPal shipping information for sending the parts?
Thanks
Should I use the PayPal shipping information for sending the parts?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
1989formula5.7l
DFI and ECM
1
Aug 15, 2015 11:35 AM
