ok i have a 85iirc tpi setup with the 9th injector hole, comes with stock injectors(sorry dont know which ones) 2 fuel rails, base,plenum, runners and throttle body also comes with a speed density computer and pigtails but needs a new chip its also missing many of the bolts for it and the one runner is partially cut where i was going to cut the centers out and weld plates to siamease them(there stock runners) however the can easily be welded back up. im looking for 125 plus shipping for everything far from complete but let me know may be somewhat negotiable. decided to go carb since i dont have alot of time with the newborn baby

 

bump make me an offer im not hard to deal with

 

where are you located? Interested in trading for a carb intake?

 

its located in oberlin ohio. i might consider a trade just needa know what you have im looking for a weiand stealth airstrike or similar

 

I have a weiand single plane(Team G?) and I also have two edelbrock performer RPM's one is air gap and the other is not.

 

is the air gap manifold the natural one?(not chrome or anything) and how much would you want extra to trade for that or would you do it straight up? im quite interested in it

 

this is still up for grabs guy still hasnt gotten back to me

 

bump make me an offer im flexible, or i dont mind trading this and mayby some cash depending on what it is for an air gap manifold or something that makes power in the 1800-6200 rpm range(thats where my cam makes power)

 

btw this also comes with a small cap dizzy. the one cut is about the size of a dime on the runner itself the other is about the size of a nickle on the plenum mounting flange. also its actually a 87 manifold, and since i work at a gm dealership i will gladly give a print out of what size bolts are needed for this(since i only got it with like 2 or 3 bolts) it may not be complete but its not a bad deal at all ive purchased all this stuff off here and about 400 bucks invested