I have a vortech style hsr that has been ported for the etec heads( basicly the entire volume of the stock gasket)with fuel rail and adjustable reg for 400.00 obo shipped. paid over 550.00 will come with stock t.b. and injectors

I also have a set of edlebrock e-tec 200 heads with an honest 1200 miles on them for 900.00 obo plus exact shipping paid over 1100.00

Dont be affraid these wont be streetable, i have had no driveabilities issues with them, the low miles is because i started an obd2 conversion and it has taken all year. I only want to sell because i wont to go the miniram and 195 afr comp route this year to push the limits of my setup. Parts are still on the car but it wont take any time to remove it since its currently not running.

 

pics of the intake
please

 

speedmachine. You have a p.m.

 

Where are you located? I'm interested in the heads. Any more info on them? what springs? studs... whats all included?

 

Springfield MO, They have the original valve train, 3/8 rocker studs, guide plates if you don't run self-alligning rockers, spings good to .600 lift cant remember exact specs but I'll look it up and post it later. Hope this helps.

 

I'm very interested, any idea when you will be taking them off the engine? I would like to see some pics to see the condition.

 

sent ya a pm

 

P.M replied

 

didn't get it