Parting 94 z28

Thread Tools
 
Search this Thread
 
Old Jan 2, 2009 | 08:22 PM
  #1  
edman87k5's Avatar
Thread Starter
Member
iTrader: (3)
 
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Parting 94 z28

I have a 94 z28 that I removed the trans from to swap to my 91. It has a lt1 in unknown condition. I have never ran the car, bought it for the trans. I was told the engine had unknown issues. It did turn over fine but would not crank. Might have had somthing to do with the major electronics that were in the car. Car is complete other than the trans, starter, flywheel, and a few misc interior parts that were already gone when I got it. Rear is a 3.42 posi disc unit. Body is in decent shape with a couple of dings in the rear quarters. I would prefer to get rid of the entire car. The pass side glass is busted out is why there is somthing over it, it is a hard top. Located in Baton Rouge, LA area. I have the title, but it is rather screwed up and not tranferable, so call it no title available. Might make a good start for a track only car? $500 for everything.
Reply
Old Jan 2, 2009 | 08:24 PM
  #2  
edman87k5's Avatar
Thread Starter
Member
iTrader: (3)
 
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Re: Parting 94 z28

src="http://img.photobucket.com/albums/v644/edman87/100_9709.jpg" border="0" alt="" /></p>
Reply
Old Jan 3, 2009 | 02:36 PM
  #3  
shadowknight's Avatar
Junior Member
 
Joined: Jul 2008
Posts: 52
Likes: 0
From: clearfield,utah
Car: 89 rs
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: stock
Re: Parting 94 z28

what parts of the interior are missing and how much for the interior? shipped to 81401
Reply
Old Jan 3, 2009 | 02:50 PM
  #4  
SomeGuy25thZ's Avatar
Senior Member
 
Joined: Sep 2007
Posts: 599
Likes: 1
From: Long Island, NY
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Parting 94 z28

If you will part out I need the Idler pulley if in good condition plus all the radiator hoses... How much for that shipped to 11710?
Reply
Old Jan 3, 2009 | 03:16 PM
  #5  
edman87k5's Avatar
Thread Starter
Member
iTrader: (3)
 
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Re: Parting 94 z28

On the interior, I know the console lid is busted/ part missing and the door panels are missing the speaker grills. I do not want to ship anything as large as interior pieces. This car has not been road driven in 2-3 years, so I would not trust the hoses and such, probably easier to get a new set.
Reply
Old Jan 5, 2009 | 07:05 PM
  #6  
CodyC123's Avatar
Junior Member
 
Joined: Nov 2007
Posts: 62
Likes: 0
From: Poland, ME
Car: 86 Z28
Engine: 385
Transmission: T5 (soon to be in pieces)
Axle/Gears: 3.73 POSI Disc
Re: Parting 94 z28

can i get some pictures of the seats? what would you take for them shipped to 04274?
Reply
Old Jan 5, 2009 | 07:14 PM
  #7  
dKillaCamaro's Avatar
Junior Member
15 Year Member
 
Joined: May 2008
Posts: 48
Likes: 0
From: Bay Area
Car: 83 Camaro
Engine: 5.0
Transmission: T-5
Axle/Gears: 3.73 open
Re: Parting 94 z28

i need an electric seat adjustment switch drivers side the controls to move the seat if there electric let me know Thanx
Reply
Old Jan 5, 2009 | 07:26 PM
  #8  
edman87k5's Avatar
Thread Starter
Member
iTrader: (3)
 
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Re: Parting 94 z28

You dont want the seats. They have been re-covered and have "****" stiched into them for some reason, with a diamond shape dotting the i, and the drivers side has a tear.

As for the seat switch, they are electric, I will check on the switch when I get a chance.
Reply
Old Jan 5, 2009 | 07:40 PM
  #9  
Bristol's Avatar
Member
iTrader: (1)
 
Joined: Aug 2002
Posts: 389
Likes: 1
From: Vancouver, B.C.
Car: 1991 Z28 1LE
Engine: 355 CID HSR
Transmission: T56
Axle/Gears: 3.23 for now
Re: Parting 94 z28

Any chance you have the trans. tunnel boot? Thanks
Reply
Old Jan 5, 2009 | 07:54 PM
  #10  
edman87k5's Avatar
Thread Starter
Member
iTrader: (3)
 
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Re: Parting 94 z28

I have the boot, but was hanging on to it for my swap.
Reply
Old Jan 11, 2009 | 05:56 PM
  #11  
CodyC123's Avatar
Junior Member
 
Joined: Nov 2007
Posts: 62
Likes: 0
From: Poland, ME
Car: 86 Z28
Engine: 385
Transmission: T5 (soon to be in pieces)
Axle/Gears: 3.73 POSI Disc
Re: Parting 94 z28

what would you want for the rear end shipped to 04274?
Reply
Old Jan 11, 2009 | 06:21 PM
  #12  
edman87k5's Avatar
Thread Starter
Member
iTrader: (3)
 
Joined: Aug 2006
Posts: 253
Likes: 1
From: above Baton Rouge, LA
Car: depends on the weather
Engine: several
Transmission: all manual
Axle/Gears: lots
Re: Parting 94 z28

Don't want to ship anything that large as I am sure it would have to go thru a freight terminal.
Reply
Old Jan 11, 2009 | 06:32 PM
  #13  
CodyC123's Avatar
Junior Member
 
Joined: Nov 2007
Posts: 62
Likes: 0
From: Poland, ME
Car: 86 Z28
Engine: 385
Transmission: T5 (soon to be in pieces)
Axle/Gears: 3.73 POSI Disc
Re: Parting 94 z28

i understand, thank you anyway
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CarGuyDennis
Organized Drag Racing and Autocross
137
Dec 6, 2016 11:02 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM
armybyrd
Engine/Drivetrain/Suspension Wanted
0
Aug 17, 2015 08:59 AM
GVMV
Exterior Parts for Sale
0
Aug 16, 2015 07:08 PM
1nastygta
Firebirds for Sale
2
Aug 8, 2015 07:38 PM




All times are GMT -5. The time now is 11:53 PM.