TPI set up and 193 heads

Reply Subscribe

Thread Tools

Search this Thread

Jun 19, 2009 | 10:36 PM

87_355ci_Camaro

Thread Starter

Member

iTrader: (2)

Joined: Sep 2006

Posts: 240

Likes: 0

From: pa

Car: 86 Iroc-Z

Engine: 310ci soon to be 355ci

Transmission: built 700r4

Axle/Gears: I think 3.08s

TPI set up and 193 heads

I have a complete TPI setup from top to bottom with all bolts and sensors plus I have a 86 harness, lockup sensor was cut and one relay was cut and spliced.250bucks plus shipping.
I have a set of 193 casting heads that were completly redone with 1.94in 1.85ex bare that someone can have for 100bucks pickup or you pay shipping.
Stock gm cam that has 10mi on it, 20bucks plus shipping.
I have pics if needed.
Thanks

Jun 21, 2009 | 02:39 PM

87_355ci_Camaro

Thread Starter

Member

iTrader: (2)

Joined: Sep 2006

Posts: 240

Likes: 0

From: pa

Car: 86 Iroc-Z

Engine: 310ci soon to be 355ci

Transmission: built 700r4

Axle/Gears: I think 3.08s

Re: TPI set up and 193 heads

No one needs a TPI set up? Shoot an offer, I dont need this stuff anymore.

Jun 21, 2009 | 03:22 PM

fcukit33

Junior Member

Joined: Aug 2008

Posts: 39

Likes: 0

From: long island, NY

Car: 92 camaro rs

Engine: 305tbi

Transmission: 700r4

Re: TPI set up and 193 heads

got any idea if i could make the harness on my 92 TBI work with a TPI set up? if so im interested

Jun 21, 2009 | 04:48 PM

87_355ci_Camaro

Thread Starter

Member

iTrader: (2)

Joined: Sep 2006

Posts: 240

Likes: 0

From: pa

Car: 86 Iroc-Z

Engine: 310ci soon to be 355ci

Transmission: built 700r4

Axle/Gears: I think 3.08s

Re: TPI set up and 193 heads

Well in order to run a TPI you need the harness. TBI is gonna run a tpi if that's what you're asking.
The top end of the tpi will work but the base plate is for non center bolt heads, you can drill them out I believe to make them work.