[FL] Keith black Forged pistons for 350/383
Thread Starter
Supreme Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Keith black Forged pistons for 350/383
I am selling these out of my car because I am going to a complete different bottom end. Building the shortblock to handle a 300+ shot.
They have 9500 miles on them. Have been run at the track roughly 30-40 times and been sprayed I would say about the 50 times overall.
http://www.summitracing.com/parts/UE...0/?image=large
They go for $445 new here and I guarantee they are in the same condition as they were. Ill give you them cleaned as I am friends with a machinist.
They are good to handle up to a 200 shot all day every day and are rated for plenty of horsepower. They are for a .030 bored motor.
They have 9500 miles on them. Have been run at the track roughly 30-40 times and been sprayed I would say about the 50 times overall.
http://www.summitracing.com/parts/UE...0/?image=large
They go for $445 new here and I guarantee they are in the same condition as they were. Ill give you them cleaned as I am friends with a machinist.
They are good to handle up to a 200 shot all day every day and are rated for plenty of horsepower. They are for a .030 bored motor.
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Thread Starter
Supreme Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Re: Keith black Forged pistons for 350/383
I think they fit whatever rods and stroke for 350 or 383
Thread Starter
Supreme Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Trending Topics
Thread Starter
Supreme Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Re: Keith black Forged pistons for 350/383
40 for shipping with delivery conformation and insurance and all the good stuff
Thread Starter
Supreme Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Re: Keith black Forged pistons for 350/383
i think its a 3.75 crank. to be honest. thats a 383 right??
Member
Joined: Feb 2008
Posts: 219
Likes: 0
From: Antelope Valley, Ca...So.Cal.
Car: was 85 TA, 91 TA both sold
Engine: was 406, now 305 tpi
Transmission: 85 had700r4,350..91 had t5
Axle/Gears: 323,373,342
Re: Keith black Forged pistons for 350/383
did you sell these ?
any part #'s
any part #'s
Member
Joined: Jul 2004
Posts: 132
Likes: 0
From: rhinebeck new york
Car: 1991 z28
Engine: forged 385 with afr's
Transmission: built 700r4
Axle/Gears: 9" and 4.56
Re: Keith black Forged pistons for 350/383
like your car is slow or something that you need to upgrade.
Thread Starter
Supreme Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Re: Keith black Forged pistons for 350/383
Member
Joined: Feb 2008
Posts: 219
Likes: 0
From: Antelope Valley, Ca...So.Cal.
Car: was 85 TA, 91 TA both sold
Engine: was 406, now 305 tpi
Transmission: 85 had700r4,350..91 had t5
Axle/Gears: 323,373,342
Re: Keith black Forged pistons for 350/383
pm sent back....cheers
Thread
Thread Starter
Forum
Replies
Last Post
Andrew Prakash
TPI
2
Sep 8, 2015 11:48 AM
