I am selling practically my whole valvtrain setup for my hydraulic cam setup.

All parts except the cam and hydrarev have 7500 miles on them of highway and dragstrip use. the cam and rev kit have maybe 3k


I first am selling the cam. It is a custom grind cam with a small base circle for a 383.

it is 240/246 560/560 @ 110 lsa at .050 duration. It is also good for a 175 shot. Is made by cammotion cams. Its a $375 cam That I will sell for 225 OBO.

I am also selling my AFR hydrarev kit which helps keep the lifters down and not float on high rpm pulls. It really helps out a lot and saves life of the drivetrain.
http://www.summitracing.com/parts/AFR-6155/

$230 dollars new will sell it for $150 because it still is practically brand new.


Next is the valves and valvsprings. MAke me an offer here. They are dart valves 2.02 intake and 1.60 exhaust. the valve springs are also dart springs they are dual valve spring 1.437 size and can handle up to a .600 lift.

come with valve guides the ratiners and all that.

the valves and springs i spent well over 350 bucks So just make an offer

the lifters are comp cam lifters pro magnum. They are in great condition because they have been used with the rev kit. http://www.summitracing.com/parts/CC...6/?image=large

100 OBO


The pushrods are trick flow pushrods that are .005 longer than stock pushrods. They were initially 87 dollars but will sell them for 50 dollars



I can sell everything together for a cheaper overall price. I will do it all for $750 OBO

With this setup and dart heads this motor makes 550 FWHP with a victor jr intake gasket matched. So it definately makes good power.

 

Edit: just totaled up the bill and it was roughly $1250 with parts

 

PM Sent on Lifters and Rev kit.