[MO] Parting out '91 RS Camaro (5.0TBI/Auto)
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Parting out '91 RS Camaro (5.0TBI/Auto)
I'm parting out a complete '91 Camaro RS, just about everything except for the interior and some misc. parts that I might need for my IROC-Z roller will be available. Off the top of my head, the only parts that I know for sure I'll be keeping for myself are the entire interior and the ground effects. Post up what you need and I'll either tell you I need it or I'll give you a price and pictures of whatever you are looking for.
It has roughly 260,000 miles on it but it did run as of April 2009. It has been sitting at a body shop since then with no keys, some lady drove it off the road into a field and there was some minor body damage to it. She never paid the tow bill or paid to have it fixed, so it sat since April and the shop sold me the entire car. I have no keys, nor a title so it will be parted out. I will not sell the entire car to you because I don't want someone to try and buy it and drive it.
It has roughly 260,000 miles on it but it did run as of April 2009. It has been sitting at a body shop since then with no keys, some lady drove it off the road into a field and there was some minor body damage to it. She never paid the tow bill or paid to have it fixed, so it sat since April and the shop sold me the entire car. I have no keys, nor a title so it will be parted out. I will not sell the entire car to you because I don't want someone to try and buy it and drive it.
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
Here are a few pictures. I can take a picture of anything you want in particular. Reply here or email me at BlueZee28@charter.net




Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
Do you need the radiator shroud as well? I will get a price including shipping to you, but it's probably going to have to wait until this weekend. My dad has been in the hospital since midnight last night with a bowel obstruction, and they haven't given us the results back from his scans. I'm not sure if he'll be getting out tomorrow or not, but when he does I'll be able to go over the car with him and start taking things off to sell and get prices.
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
Can you post some pics of the T-tops, rims, and center caps? What price are you asking for each. I live in Columbia, so no need for shipping.
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Member
iTrader: (2)
Joined: Sep 2004
Posts: 445
Likes: 0
From: ky
Car: 1992 Camaro ZO3
Engine: 350 HSR
Transmission: 700R4
Axle/Gears: 9 bolt/3.70's
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
Are the tail lights good? I need some I can polish out, but they need to be complete, no cracks, or push pins missing. thanks.
Trending Topics
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
I know both sets of tail lights from the two cars are in good shape, but I didn't look at the tabs on the back yet. I'm pretty sure we will be using the RS's lights and sell the ones from the '89 because they had blackout covers on them with double sided velcro tape. The tape just needs to be removed and then you could polish them up real nice. They're still in good shape regardless though.
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
Do you need the radiator shroud as well? I will get a price including shipping to you, but it's probably going to have to wait until this weekend. My dad has been in the hospital since midnight last night with a bowel obstruction, and they haven't given us the results back from his scans. I'm not sure if he'll be getting out tomorrow or not, but when he does I'll be able to go over the car with him and start taking things off to sell and get prices.
Junior Member
iTrader: (4)
Joined: Jan 2008
Posts: 55
Likes: 0
Car: 86 iroc-z, 78 z28, 91 z28
Engine: 355-carb, 350-carb, 350-TPI
Transmission: 5speed, at, 5 speed
Axle/Gears: 3.42, 3.42-stock, 3.42-1LE
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
got a factory yellow print radio?
black rear seats?
black rear seats?
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
No black seats. The only factory radio I have is a a Bose unit from my wife's '87 IROC-Z. The previous owner removed it from the car because it has a very small crack in the face and he wanted to try and find a display face to replace it with. He never found it and so he put in an aftermarket CD player. I don't think the crack is bad at all, I wouldn't have removed it from the car if it were up to me, it's a hair line crack in the front of it. Anyway, I can show you if you'd be interested in that.
Member
iTrader: (2)
Joined: Sep 2004
Posts: 445
Likes: 0
From: ky
Car: 1992 Camaro ZO3
Engine: 350 HSR
Transmission: 700R4
Axle/Gears: 9 bolt/3.70's
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
I know both sets of tail lights from the two cars are in good shape, but I didn't look at the tabs on the back yet. I'm pretty sure we will be using the RS's lights and sell the ones from the '89 because they had blackout covers on them with double sided velcro tape. The tape just needs to be removed and then you could polish them up real nice. They're still in good shape regardless though.
Thread Starter
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
Yea they're the same exact lights.
Supreme Member

Joined: Nov 2008
Posts: 1,545
Likes: 10
From: South Carolina
Car: 85 2M6, 87 'Bird 88 'burb
Engine: LX9, LG4, L05
Transmission: F23, 700r4, 700R4
Axle/Gears: 3.63, 2.73, 4.10
Re: Parting out '91 RS Camaro (5.0TBI/Auto)
how are the ground effects? good shape? how much for the all of them shipped to 32504?
Edit:
Mybad, can't read
Edit:
Mybad, can't read
Last edited by ericjon262; Dec 31, 2009 at 10:27 PM. Reason: can't read.
Thread
Thread Starter
Forum
Replies
Last Post




