[FL] Comp Cam pro magnum 1.6 rockers great condition

Thread Tools
 
Search this Thread
 
Old Feb 22, 2010 | 10:22 AM
  #1  
kowboy59's Avatar
Thread Starter
Supreme Member
iTrader: (8)
 
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Comp Cam pro magnum 1.6 rockers great condition

Selling my used Comp cam pro magnum roller rockers. They are 1.6 ratio and are in perfect condition.

I will get pics of them today.


here is the part.

they are good for solid roller cams also and are very strong.

http://www.summitracing.com/parts/CCA-1318-16/

210 shipped. I accept paypal and money orders
Reply
Old Feb 22, 2010 | 10:32 AM
  #2  
3rd gen Will's Avatar
Senior Member
iTrader: (8)
 
Joined: Jun 2009
Posts: 768
Likes: 2
From: Peoria, AZ
Car: 91 Z28, 2000 T/A
Engine: SBC 355, LS1
Transmission: T56, T56
Axle/Gears: 10bolt 3.73, 3.42
Re: Comp Cam pro magnum 1.6 rockers great condition

The summit link says they are self aligning, just want to verify that with you. Also did you have them under stock center bolt valve covers? if so any problems fitting them in there?

Thanks!

Last edited by 3rd gen Will; Feb 22, 2010 at 11:01 AM.
Reply
Old Feb 22, 2010 | 10:38 AM
  #3  
kowboy59's Avatar
Thread Starter
Supreme Member
iTrader: (8)
 
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Re: Comp Cam pro magnum 1.6 rockers great condition

I had them under some cheapy valve covers from dart. I dont know if they fit most likely you will need to buy some new ones but theyre only like 20 bucks lol. You might be able to dent your stockers but I have no clue.

These are self aligning rockers and they come with the nuts
Reply
Old Feb 22, 2010 | 01:20 PM
  #4  
Stangski09's Avatar
Senior Member
iTrader: (10)
 
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: Comp Cam pro magnum 1.6 rockers great condition

Buddy at mopac promised me that pro magnums will fit under stock centerbolts. And he said the new ultra pro magnums will too.
Reply
Old Feb 24, 2010 | 10:23 PM
  #5  
kowboy59's Avatar
Thread Starter
Supreme Member
iTrader: (8)
 
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Re: Comp Cam pro magnum 1.6 rockers great condition

185 shipped
Reply
Old Feb 26, 2010 | 06:04 AM
  #6  
z 28 jari's Avatar
Member
20 Year Member
iTrader: (1)
 
Joined: Dec 2001
Posts: 459
Likes: 2
From: Finland
Car: 1985 Camaro Z-28
Engine: 385
Transmission: th700r4+Edge 2800 stall
Axle/Gears: 3.42
Re: Comp Cam pro magnum 1.6 rockers great condition

Pm sent
Reply
Old Feb 27, 2010 | 08:48 PM
  #7  
1986Z28OWNER's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 962
Likes: 13
From: Canada
Car: 1979 Malibu
Engine: Blown LSx
Transmission: T56 Magnum
Axle/Gears: 9"/wavetrac/35's/3.70
Re: Comp Cam pro magnum 1.6 rockers great condition

Originally Posted by Stangski09
Buddy at mopac promised me that pro magnums will fit under stock centerbolts. And he said the new ultra pro magnums will too.
No they wont, You were mis-informed. Magnums roller tip rockers will, Pro magnum, and ultra pro will not.
Reply
Old Feb 27, 2010 | 08:52 PM
  #8  
mw66nova's Avatar
Supreme Member
20 Year Member
iTrader: (13)
 
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
Re: Comp Cam pro magnum 1.6 rockers great condition

mileage and why are you selling?
Reply
Old Feb 27, 2010 | 08:58 PM
  #9  
kowboy59's Avatar
Thread Starter
Supreme Member
iTrader: (8)
 
Joined: Dec 2004
Posts: 1,153
Likes: 0
From: kissimmee fl
Car: 88 iroc-z z-28
Engine: 383
Transmission: th400
Axle/Gears: 3.42
Re: Comp Cam pro magnum 1.6 rockers great condition

Originally Posted by mw66nova
mileage and why are you selling?

Roughly 5-6k on them not all racing miles car was a daily driver. Selling because I picked up a set of jesel shaft mount rockers for 600 bucks.
Reply
Old Feb 27, 2010 | 10:14 PM
  #10  
Stangski09's Avatar
Senior Member
iTrader: (10)
 
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: Comp Cam pro magnum 1.6 rockers great condition

But Darren said they would...
Reply
Old Feb 27, 2010 | 10:35 PM
  #11  
1986Z28OWNER's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 962
Likes: 13
From: Canada
Car: 1979 Malibu
Engine: Blown LSx
Transmission: T56 Magnum
Axle/Gears: 9"/wavetrac/35's/3.70
Re: Comp Cam pro magnum 1.6 rockers great condition

Originally Posted by Stangski09
But Darren said they would...
They wont, They wouldnt clear slightly taller aftermarkets on my buddys car so they sure as hell wont clear stockers
Reply
Old Feb 27, 2010 | 10:42 PM
  #12  
Stangski09's Avatar
Senior Member
iTrader: (10)
 
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: Comp Cam pro magnum 1.6 rockers great condition

But you never tried them on stockers right? Maybe his breather mockup was larger or something was just wrong. Cause I bougt chromed stock ones from a dude off of ebay and they are beautiful, and Darren said the pro magnums will work. I was going to pick them up next paycheck.
Reply
Old Feb 28, 2010 | 05:24 AM
  #13  
z 28 jari's Avatar
Member
20 Year Member
iTrader: (1)
 
Joined: Dec 2001
Posts: 459
Likes: 2
From: Finland
Car: 1985 Camaro Z-28
Engine: 385
Transmission: th700r4+Edge 2800 stall
Axle/Gears: 3.42
Re: Comp Cam pro magnum 1.6 rockers great condition

Sold.
Reply
Old Mar 2, 2010 | 12:08 AM
  #14  
1986Z28OWNER's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 962
Likes: 13
From: Canada
Car: 1979 Malibu
Engine: Blown LSx
Transmission: T56 Magnum
Axle/Gears: 9"/wavetrac/35's/3.70
Re: Comp Cam pro magnum 1.6 rockers great condition

Originally Posted by Stangski09
But you never tried them on stockers right? Maybe his breather mockup was larger or something was just wrong. Cause I bougt chromed stock ones from a dude off of ebay and they are beautiful, and Darren said the pro magnums will work. I was going to pick them up next paycheck.
We did try stockers, then tried some proform aftermarkets, and ended up going to a tall aluminum valve cover, Take it from someone who has done it and not someone who has just talked about it. There is reasoning darren dosnt work for mopac any longer....
Reply
Old Mar 2, 2010 | 08:32 AM
  #15  
Stangski09's Avatar
Senior Member
iTrader: (10)
 
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: Comp Cam pro magnum 1.6 rockers great condition

We did try stockers, then tried some proform aftermarkets, and ended up going to a tall aluminum valve cover, Take it from someone who has done it and not someone who has just talked about it. There is reasoning darren dosnt work for mopac any longer....
Wow, that's weird. He was there 2 weeks ago? But he got the can?. He was the dude I bought off of.b For $370 cnd those ultra pro magnums are a good deal. Decent gains too

Last edited by Steve86TA; Mar 21, 2010 at 03:19 PM. Reason: cursing
Reply
Old Mar 21, 2010 | 07:49 AM
  #16  
z 28 jari's Avatar
Member
20 Year Member
iTrader: (1)
 
Joined: Dec 2001
Posts: 459
Likes: 2
From: Finland
Car: 1985 Camaro Z-28
Engine: 385
Transmission: th700r4+Edge 2800 stall
Axle/Gears: 3.42
Re: Comp Cam pro magnum 1.6 rockers great condition

Have you sent the lifters?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TreDeClaw
Theoretical and Street Racing
11
Jun 22, 2021 08:21 PM
midge54
LTX and LSX
21
Dec 27, 2019 04:14 PM
sweet_87_iroc
Camaros for Sale
5
Sep 25, 2015 10:01 PM
1988iroc350tpi
Tech / General Engine
8
Aug 14, 2015 07:52 PM
TreDeClaw
Transmissions and Drivetrain
15
Aug 14, 2015 06:58 PM




All times are GMT -5. The time now is 11:44 AM.