comp cams 274 kit, TPI setup
Thread Starter
Member
iTrader: (2)
Joined: Sep 2006
Posts: 240
Likes: 0
From: pa
Car: 86 Iroc-Z
Engine: 310ci soon to be 355ci
Transmission: built 700r4
Axle/Gears: I think 3.08s
comp cams 274 kit, TPI setup
Complete comp cams 274 xe cam kit, like the one shown in the link, Id like to get 250 plus shipping OBO... Kit is brand new, opened to check over parts when I recieved them...
http://www.summitracing.com/parts/CCA-K12-246-3/
I also have a semi complete TPI setup, only missing a knock sensor and maybe one or two bolts...
Runners are in good shape but one is dented probly from when the motor was taken out and rebuilt, 25k on new HEI dizzy with new mod chip, Harness is pretty much shot, trans lockup plug, fan plug are cutt, I have most of it labled and will include, computer is fine, MAF might be bad it ran fine when I pulled all this stuff off a year ago, I had a problem with my fuel pump kicking on so I converted it to carb, since then it has sat in a box inside my house. This setup is off of a 86 Iroc 305 car with 113,XXX miles... Ive tried to sell it on here before with no luck, Id like to keep all this complete unless I have buyers for everything... Pics upon request.
200.00 plus shipping OBO please no low ball offers..
Stock 350 cam, no idea where to find the castings maybe someone can help? 10miles on that...
416 heads, with 50k, bare... offers?
I need this stuff gone its taking up space and I have no use for it anymore... thanks
http://www.summitracing.com/parts/CCA-K12-246-3/
I also have a semi complete TPI setup, only missing a knock sensor and maybe one or two bolts...
Runners are in good shape but one is dented probly from when the motor was taken out and rebuilt, 25k on new HEI dizzy with new mod chip, Harness is pretty much shot, trans lockup plug, fan plug are cutt, I have most of it labled and will include, computer is fine, MAF might be bad it ran fine when I pulled all this stuff off a year ago, I had a problem with my fuel pump kicking on so I converted it to carb, since then it has sat in a box inside my house. This setup is off of a 86 Iroc 305 car with 113,XXX miles... Ive tried to sell it on here before with no luck, Id like to keep all this complete unless I have buyers for everything... Pics upon request.
200.00 plus shipping OBO please no low ball offers..
Stock 350 cam, no idea where to find the castings maybe someone can help? 10miles on that...
416 heads, with 50k, bare... offers?
I need this stuff gone its taking up space and I have no use for it anymore... thanks
Thread
Thread Starter
Forum
Replies
Last Post
1988iroc350tpi
Tech / General Engine
8
Aug 14, 2015 07:52 PM





