how much for Complete spohn coil-over kit shiped to V0N 2P0 ?

New stainless steel braided brake lines + New hatch struts, price to 49504

You got a PM

vacuum canster, is it only for the power brakes? or is it the stock style canister from a thirdgen? if its just for the power brakes, i am interested. price shipped to 06278. and a pic if possible please!

how much each do you want for the
exhaust system
BMR Lower control arms, poly bushings
and the Lakewood 90/10 struts, adjustable rear drag shocks

pictures if you dont mind.

how much for the sfcs?

Why not post any prices to at least let people know if they should even be interested or inquire about a particular item or items? I'm sure you have a ton of money in these parts, but obviously people are looking to pay less than retail. You probably have a price in mind for every item of what you would like to get, so why not just post it up?
Could save alot of wasted PMs and people wasting their and/or your time.

All posts & P.M.'s have been replied to.

Pricing is very difficult to work out right now, since multiple people are interested in some items. Please be patient with me as I try to work this out, I'm trying to keep it as fair as I can for everyone. I have to factor in cost, plus cost to ship, plus consider how shipping is impacted by people interested in more than one item. Like I said, thank you for being patient and I WILL get back to you via P.M.

P.M.ing is just easier for me to track and know who I've responded to already and when, that's why I prefer it

Eh, valid point. I'll update the first post with prices for what I'd hope to get, not including shipping.

If coilovers are still avail.. how much

There are several people interested in the coil-overs, SFC's, exhaust, differential cover, brakes and wire looms in particular at the moment (fewer may be interested after price posting?). They are still available, but I can't make "guarantees" to anyone for those items.

$25 for the cat shipped to 77504?

pic of adjustable panhard bar and wire looms?

let the other guys at the coil-overs. boss says no.

Noted, thank you for letting me know

The aluminum adjustable panhard bar is SOLD!

Thanks again.

Is the starter a small nose 153 tooth flywheel starter (T5)?

is the radiator still for sale? & is it for auto or stick?

Looking for 9 bolt complete Posi either 3.27 or 3.70 ratio with pinon gear.
If you have this and want to sell it please PM or email me with price, also what you want for the 3 pice louvers, can you sen some pic.@ bhis11@yahoo.com
Thanks

Still have the SFC's?Price shipped to 45662.

How much for new pads and calibers ALL 4 shipped to: 80027? Pics if possible please! tbalch@hotmail.com

How much for the 355 as a long block?

how much is the shippin for the window louver to 78641. can you send me a pic?

P.M. me your email address & I'll send a pic

BMR Lower control arms, poly bushings;(would these fit a stock 91 bird readend) would you take $50?

I'll do $65 shipped...

They will fit a stock '91 rearend, yes. Were you happy with the shocks & cat?

Put me on the list for the sfc's if the deal doesn't happen.

very happy with the shocks and cat. i already got them installed

So is $65 shipped more than you can afford for the LCA's right now?

what kind of rear end? how much for it?

It's a 10 bolt, 3.42 gears, drum brakes, no limited slip even.

So it's nothing special, practically worthless IMO. It's really about as crappy a rear end as these cars ever came with, except for the gearing

Any pictures of this?

Mechanical fan and fan clutch for reverse rotation water pump. This what you need if you want to run a mechanical fan, with a serpentine belt system. ($50 for fan and clutch)


Thanks,
Dave

40 bucks for the relocation brackets shipped

still got the steering box?

Yes sir, I certainly do. Lets take it to P.M. if you're interested

I'm interested in the motor. Can you tell me about it. I'd be interested in the short or long block only. How much do you want for it? Pics please.

Thanks,
Ted

I see in your sig you have TPI, are you planning to swap to carb?

It's a carbureted motor, and to be honest the camshaft is not computer-controlled compatible. So unless you were planning to swap, I couldn't sell this to you in good conscience.

If you're still interested, P.M. me about it and I'll give you all the specs

sent pm

-Complete Spohn coil-over kit, 150 lb springs *For the front* ($500 shipped)

-Lakewood 90/10 struts ($140)


how much use are on these components? I am interested depending on condition.

The struts just got sold earlier today, sorry.

As for the coil-over kit, it was installed but never driven, so zero miles. No chips in the powdercoated or anodized finishes, looks brand new. P.M. me your email address if you'd like to see in picture

No I'm keeping it TPI. Thanks for the response.

Ill take some pics of the coil over setup turbotank AT Gmail . I take it that its the "drag race" setup I could find one that had 150# springs tho?

P.M. me your email address, and I'll get some pics to you

I've had a few questions about the spring rate. Spohn only offers the springs in a 175# and 200# rate (small & big block, respectively)

I'd done a good deal of weight reduction, and a 150# spring was a better match for my car (there were no problems with ride height, if you're worried about that). So I ordered the complete kit from Spohn, minus springs and got my own springs in the same length, just lighter rate from Summit Racing. I hope that answers your question

how much for torque bar, frame connectors and lca's with relocation brackets? shipped to 44319.

Would you be willing to sell it without the springs?

The torque arm, subframe connectors & control arm brackets have been sold.

How's $65 shipped sound for the LCA's?

-Rear window louvers, 3-piece style (Honestly not comfortable shipping these, pickup only I'm afraid, sorry everyone. But I'd hate for something to get broken)

complete with mounting hardware etc ? and How much ?

... I almost want to get a set for the "history" you know throw on the louvers, and 15" stockers with BFG Radial T/A's on them, and hit up Peach Days

~DaVe

Peach days eh? Sounds like you don't live all that far away from me

They have all the mounting hardware, what sounds like a fair price to you? They're in prretty good shape, I'd give them a repaint though personally.

WOW ! I have no idea what too offer ...

and yea I'm up in Cache Valley

~DaVe