whitedevilTA

iTrader: (8)

Hey guys, as the title says I'm trying to clean out some stuff I've had lying around. Most of the stuff is B.O. unless otherwise stated.

Centerbolt valve cover gaskets, felpro, brand new B.O.


TPIS custom burned PROM. Out of 86 trans am, it was burned for a 350 with Trick flow heads, Comp XR276 cam, and a mini ram with 30 lbs injectors and an MAF set up. As long as you use 30 lbs injectors and a heads and cam motor I think it will be generally close in the tune. **SOLD**


I have 2 7165 ECM's. One is bent where the PROM cover goes on since there was a custom chip with a cable mount on it, but they both worked fine when removed. B.O. One left, other is SOLD


Buffer box for speedo. I have no idea what this will work on. Came out of 86 trans am with a 305 TPI and auto trans. B.O.

whitedevilTA

iTrader: (8)

Chrome alternator mount for a basic carbed SBC. B.O.


2 alternators. Both the 86 and below style. One has a V belt pulley, other has a serpentine pulley. Both worked perfect when removed. B.O.


Tranny mount for either auto or manual trans in nice shape and a 3 prong oil pressure sensor with block mount. No idea what year the sensor is off of. B.O. for both

whitedevilTA

iTrader: (8)

Centerforce billet steel 153 tooth flywheel for 400 engines (possibly 383 as well). Never been resurfaced. In great shape with a little surface rust forming. 310$ new. Asking 125 + shipping

whitedevilTA

iTrader: (8)

Stock flywheel for T5 set up. I believe it is a 153 tooth. Not sure what it's out of. Possibly off of 6 cyl...not sure if they are the same? B.O.

Mr. Notorious

iTrader: (1)

is the centerforce flywheel for a 1 piece rear main? Did you have the VATS and EGR removed when the chip was burned?

whitedevilTA

iTrader: (8)

The centerforce flywheel is for a 2 piece main.....I don't think there is such thing as a 1 piece rear main 400 block. If you wanted to be 100% sure, I believe the closeup I took is the part number, which summit should have listed.

As far as the PROM, EGR was removed as I had no emissions equipment on the engine at all. My car was an 86 as well so it never had VATS, so yes that is removed as well. No cold start injector either...I had that removed from the tune.

Let me know if you need any other info.

Twin_Turbo

iTrader: (25)

Can you make me a good deal on the unmolested ECM and the TPIS prom??

What trick flow heads would that be? 23s or G2/G1s??

whitedevilTA

iTrader: (8)

PM sent

whitedevilTA

iTrader: (8)

PROM and one of the ECM's are sold. Other parts still available. Pending sale on stock flywheel.