[Sold] SSBC aluminum dual piston calipers and complete performance disk brake system
04-20-2011, 06:12 PM
#1
SSBC aluminum dual piston calipers and complete performance disk brake system
Selling my front brake system off my 1987 bird. I have the original instructions and information of my brakes and they have worked great but now im upgrading due to a big block install.
Heres whats for sale: COMPLETE FRONT BRAKE SYSTEM
1.) SSBC force 10 aluminum dual stainless piston calipers (about 2yrs old, pass side was rebuilt about 3,000 miles ago) work great and are in great shape! comes with caliper hardware installed. these calipers are completely rebuildable from SSBC, I had the pass side rebuilt and it cost me 100$ and they basically sent me a whole new back half of the caliper so its great!
http://www.summitracing.com/parts/SSB-A181/
2.) Russell braided stainless brake lines from caliper to stock hard line (just as old as the calipers) work fine.
http://www.summitracing.com/parts/RUS-692360/
3.) SSBC ceramic pads, only have 3,000 miles on them and where bedded into the summit rotors
4.) Summit racing ultimate performance (slotted and dimpled surface), only have 3,000 miles on them and where replaced with new pads above.
http://www.summitracing.com/parts/SUM-KAR8213PS/
These are zinc washed by the way.
5.) rotors come with new seals installed and brand new timken bearings that only have 3,000 miles on them as well.
6.) I will throw in a BRAND NEW set of power stop cermaic pads that I had for my next pad change.
http://www.summitracing.com/parts/PWR-16-154/ These are the brand however summit doesnt seem to have the fronts listed, they were 60$ for the front pad set.
All this cost me over 840$... As the only thing that have miles on them are 1 caliper and the brake lines I would be willing to let them go for 400$ plus 50$ shipping (these rotors weigh a ton! the calipers are really light since they are aluminum. I will ship UPS to the continental USA 48 states. I accept paypal, money order, and personal check.
Im attaching a pic of what they looked like when i installed them on my car 3,000 miles ago, the cars been sitting for a few months in a tent so the rotors have slight surface rust on them but this is what you would get basically.
Heres whats for sale: COMPLETE FRONT BRAKE SYSTEM
1.) SSBC force 10 aluminum dual stainless piston calipers (about 2yrs old, pass side was rebuilt about 3,000 miles ago) work great and are in great shape! comes with caliper hardware installed. these calipers are completely rebuildable from SSBC, I had the pass side rebuilt and it cost me 100$ and they basically sent me a whole new back half of the caliper so its great!
http://www.summitracing.com/parts/SSB-A181/
2.) Russell braided stainless brake lines from caliper to stock hard line (just as old as the calipers) work fine.
http://www.summitracing.com/parts/RUS-692360/
3.) SSBC ceramic pads, only have 3,000 miles on them and where bedded into the summit rotors
4.) Summit racing ultimate performance (slotted and dimpled surface), only have 3,000 miles on them and where replaced with new pads above.
http://www.summitracing.com/parts/SUM-KAR8213PS/
These are zinc washed by the way.
5.) rotors come with new seals installed and brand new timken bearings that only have 3,000 miles on them as well.
6.) I will throw in a BRAND NEW set of power stop cermaic pads that I had for my next pad change.
http://www.summitracing.com/parts/PWR-16-154/ These are the brand however summit doesnt seem to have the fronts listed, they were 60$ for the front pad set.
All this cost me over 840$... As the only thing that have miles on them are 1 caliper and the brake lines I would be willing to let them go for 400$ plus 50$ shipping (these rotors weigh a ton! the calipers are really light since they are aluminum. I will ship UPS to the continental USA 48 states. I accept paypal, money order, and personal check.
Im attaching a pic of what they looked like when i installed them on my car 3,000 miles ago, the cars been sitting for a few months in a tent so the rotors have slight surface rust on them but this is what you would get basically.
Last edited by customblackbird; 05-09-2011 at 09:51 PM.
05-05-2011, 01:18 PM
#5
Senior Member
Join Date: Sep 2009
Location: Downers Grove, IL
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 / 04 GTO
Engine: GMPP 350 TPI / LS1
Transmission: WC T5 / T56
Axle/Gears: 3.23 / 3.46
Re: SSBC aluminum dual piston calipers and complete performance disk brake system
pm me for just the calipers/ pads
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
