[GA] NIB #184 casting bowtie block / prepped&splayed LT1 block / Gen V 454 bare block F/S
06-20-2012, 11:37 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Hinesville, GA USA
Posts: 938
Likes: 0
Received 1 Like
on
1 Post
Car: '86 IROC-Z/'94 Z28
Engine: 350 LT1/382 LT1
Transmission: 4L60-E/T-56
Axle/Gears: 3.45/3.42 (soon 4.10)
NIB #184 casting bowtie block / prepped&splayed LT1 block / Gen V 454 bare block F/S
I have an extra bowtie block I wont be using.
10051184 2 bolt main bowtie block. It has siamesed cylinders and features priority main oiling and a 1 piece rear main seal. Will accept a cam retainer plate but requires linkbar lifters to go roller. The is a new block, with rough bored cylinders at 3.875. GM rates these for a max 4.155 bore but there are some people running them out to 4.185 due to cylinder wall thickness. This is a 350 main, standard deck block.
I just want out of it what I have into it, $750. Would make a great alternative for a high power build to a standard 350 chevy block.
Also taking offers on an LT1 block I have. +0.030 bore, 4 bolt splayed caps, ready to build. Never any damage. Looks like I might not be using it. I'd take $500 for it.
Last, I have a bare 454 standard deck block for sale. Gen V, same block as the 454 SS was built on for the silverado SS. No machine work done, just a core for a good build. $200
Prefer pickup in Hinesville GA, but will ship if buyer pays shipping / pallet costs. Would also meet at a reasonable distance.
10051184 2 bolt main bowtie block. It has siamesed cylinders and features priority main oiling and a 1 piece rear main seal. Will accept a cam retainer plate but requires linkbar lifters to go roller. The is a new block, with rough bored cylinders at 3.875. GM rates these for a max 4.155 bore but there are some people running them out to 4.185 due to cylinder wall thickness. This is a 350 main, standard deck block.
I just want out of it what I have into it, $750. Would make a great alternative for a high power build to a standard 350 chevy block.
Also taking offers on an LT1 block I have. +0.030 bore, 4 bolt splayed caps, ready to build. Never any damage. Looks like I might not be using it. I'd take $500 for it.
Last, I have a bare 454 standard deck block for sale. Gen V, same block as the 454 SS was built on for the silverado SS. No machine work done, just a core for a good build. $200
Prefer pickup in Hinesville GA, but will ship if buyer pays shipping / pallet costs. Would also meet at a reasonable distance.
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
12-02-2016 06:33 PM
