[Sold] blower motor/AC firewall shroud/cover
Thread Starter
Joined: Feb 2007
Posts: 4,770
Likes: 64
From: Trumbull CT
Car: 87 TA clone
Engine: 70/70 Turbo 5.3 LS
Transmission: bullet proof 2004R
Axle/Gears: ford 8.8, 3.55 gears
blower motor/AC firewall shroud/cover
Off of my 1987 formula 350, in decent shape, only small broken part at very bottom at mounting flange... shouldn't be an issue. Has the blower motor fan resistor still installed.
asking 30$, don't really want to ship but if thats what is wanted I will do it. Buyer pays full shipping.
asking 30$, don't really want to ship but if thats what is wanted I will do it. Buyer pays full shipping.
Last edited by customblackbird; Aug 16, 2012 at 11:56 PM.
Member
iTrader: (2)
Joined: Mar 2001
Posts: 190
Likes: 0
From: Cecil County Raceway, MD
Car: 1984 Camaro Sport Coupe
Engine: RHS/LSx 427
Transmission: Powerglide
Axle/Gears: Fab9 3.00 gears
Re: blower motor/AC firewall shroud/cover
Off of my 1987 formula 350, in decent shape, only small broken part at very bottom at mounting flange... shouldn't be an issue. Has the blower motor fan resistor still installed.
asking 30$, don't really want to ship but if thats what is wanted I will do it. Buyer pays full shipping.
asking 30$, don't really want to ship but if thats what is wanted I will do it. Buyer pays full shipping.
Thread Starter
Joined: Feb 2007
Posts: 4,770
Likes: 64
From: Trumbull CT
Car: 87 TA clone
Engine: 70/70 Turbo 5.3 LS
Transmission: bullet proof 2004R
Axle/Gears: ford 8.8, 3.55 gears
Re: blower motor/AC firewall shroud/cover
Im located in northern NJ, 07052.
Pic as requested, just the bottom no big deal, it has the resistor switch still installed, I also have the blower motor which was working when i pulled it but Its on my custom blower cover which is for sale as well
I also have a custom blower cover that I made out of fiberglass, its an AC delete but bolts on to the stock mounting areas, its very low profile and gives lots of clearance with the pass side of the head/header/Valve cover. I made it like this bc all the stock AC delete boxes are so large and look like a rectangle bolted to the firewall, this smoothes out the firewall and all you really see is the blower motor. I have pics of it mounted on my firebird a few years ago but they are on my other old computer. worked great, but only had one speed... FAST! lol unless you install the resitor switch then you can have all the speeds.
I had it on my bird for a while and it worked good. The motor was good, but its been sitting for about a year, covered from the elements of course.
Pic as requested, just the bottom no big deal, it has the resistor switch still installed, I also have the blower motor which was working when i pulled it but Its on my custom blower cover which is for sale as well
I also have a custom blower cover that I made out of fiberglass, its an AC delete but bolts on to the stock mounting areas, its very low profile and gives lots of clearance with the pass side of the head/header/Valve cover. I made it like this bc all the stock AC delete boxes are so large and look like a rectangle bolted to the firewall, this smoothes out the firewall and all you really see is the blower motor. I have pics of it mounted on my firebird a few years ago but they are on my other old computer. worked great, but only had one speed... FAST! lol unless you install the resitor switch then you can have all the speeds.
I had it on my bird for a while and it worked good. The motor was good, but its been sitting for about a year, covered from the elements of course.
Thread
Thread Starter
Forum
Replies
Last Post
buckeyecelt
Tech / General Engine
3
Sep 24, 2015 05:50 AM









