[IL] '85 ecm w/ custom chip

Thread Tools
 
Search this Thread
 
Old Nov 14, 2012 | 11:51 AM
  #1  
Midnight85's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 50
Likes: 2
From: Central Hellinois
Car: 1985 Corvette
Engine: 383
Transmission: 700R4
Axle/Gears: 3:07
'85 ecm w/ custom chip

I have the ecm out of my 1985 Corvette, it has a custom tune chip that goes with it. This chip is for a mildly modded 350-383. I don't know the specifics on it except it is tuned to use a 160 degree stat, the egr & emissions are deleted. I ran it for about 5 years, (the ecm is only about 6 months old) in my Vette and it performed well. My Vette is a 383 with later aluminum heads, a mild cam, and had extensive porting done to the intake plenum, runners & base. It also has long tube headers w/ true dual exhaust. I just switched over to the Edelbrock Pro Flo XT manifold and upgraded the ecm to the later 165. If your car is similar to mine engine-wise this should be a plug & play. I have well over $300 invested in the tune and the new ecm, I will take $200. I can post a pic if you want but an ecm is an ecm.
Reply
Old Nov 14, 2012 | 04:38 PM
  #2  
Midnight85's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 50
Likes: 2
From: Central Hellinois
Car: 1985 Corvette
Engine: 383
Transmission: 700R4
Axle/Gears: 3:07
Re: '85 ecm w/ custom chip

I'll even sweeten the deal a litle more, I'll throw in the burnoff module too. I have no use for these parts anymore & I want them out of my way. I'm a new member so just to ease your mind, I have been on the Corvette Forum for quite a few years & have dealt with members there and my ebay rating is 100% with well over 700 feedbacks both as a seller & buyer.
Reply
Old Nov 14, 2012 | 09:54 PM
  #3  
Midnight85's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 50
Likes: 2
From: Central Hellinois
Car: 1985 Corvette
Engine: 383
Transmission: 700R4
Axle/Gears: 3:07
Re: '85 ecm w/ custom chip

Like I said above, I want these things gone, I am lowering the price to $150 shipped. At this price I am giving the ecm & module away & selling the chip for a lot less than I paid for it. OR, if you are interested in just the ecm with no chip and the module I'll let them go for $50. shipped. You'll never find a better deal on those two parts even if you just keep them as spares. I will consider any reasonable offer too but I am not desperate for money so I will throw them away if no one wants them.
Reply
Old Nov 14, 2012 | 10:10 PM
  #4  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (95)
 
Joined: Dec 2004
Posts: 16,890
Likes: 1,013
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: '85 ecm w/ custom chip

good price for a 1226870 with eprom and calpack swap this ecm was used on 85 tpi and 2.8L mpfi
Reply
Old Nov 18, 2012 | 12:57 AM
  #5  
Midnight85's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 50
Likes: 2
From: Central Hellinois
Car: 1985 Corvette
Engine: 383
Transmission: 700R4
Axle/Gears: 3:07
Re: '85 ecm w/ custom chip

ttt
Reply
Old Nov 18, 2012 | 07:51 AM
  #6  
Midnight85's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 50
Likes: 2
From: Central Hellinois
Car: 1985 Corvette
Engine: 383
Transmission: 700R4
Axle/Gears: 3:07
Re: '85 ecm w/ custom chip

UPDATE: Last price drop before the garbage can, $100. for all plus $10 shipping. I coubt if I can ship it for $10. but I will cover whatever extra it is.
Reply
Old Nov 18, 2012 | 04:25 PM
  #7  
Midnight85's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2011
Posts: 50
Likes: 2
From: Central Hellinois
Car: 1985 Corvette
Engine: 383
Transmission: 700R4
Axle/Gears: 3:07
Re: '85 ecm w/ custom chip

SOLD!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
F.I. 57 Belair
DFI and ECM
8
Aug 23, 2021 01:09 AM
gta892000
TPI
13
Aug 11, 2019 11:16 AM
85 Jimmy
TPI
3
Sep 30, 2015 07:56 AM
ramicio
Engine/Drivetrain/Suspension Wanted
3
Sep 28, 2015 01:18 PM
Ranbo108
Tech / General Engine
14
Sep 9, 2015 12:20 PM




All times are GMT -5. The time now is 08:15 PM.