Cast martin turbo manifold. This would work well in a stock thirdgen, C3 corvette, or full size truck. In a thirdgen I think the largest turbo you could go with is a TO4S with an on-center exhaust housing. My T76 hits the valve cover and requires a 2" spacer, which puts it through the hood.

I suspect it would be similar on a C3 corvette, but on a full size truck with all the hood-height in the world you could run any size T4 with the appropriate spacer (to clear the valvecover).


Manifold only. You would use your stock manifold and partial y-pipe. Turbo manifold has a standard 3bolt flange for the crossover.

$300 or best offer.

-- Joe

 

TTT

Going on ebay

-- Joe