Roller Cam
12-06-2017, 11:44 AM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Roller Cam
Used Comp Roller Custom Cam
Specs:
Camshaft, Hydraulic Roller Tappet
Advertised Duration 292/292
Duration @ .050 in. 240/240
Lift .561/.561
Lobe Sep 112
Small base circle for stroker Small Block Chevy
Used on a 406 with 195 afr heads made 465 rwhp on Motor. Cam is like new with less than 500 miles. $125
Specs:
Camshaft, Hydraulic Roller Tappet
Advertised Duration 292/292
Duration @ .050 in. 240/240
Lift .561/.561
Lobe Sep 112
Small base circle for stroker Small Block Chevy
Used on a 406 with 195 afr heads made 465 rwhp on Motor. Cam is like new with less than 500 miles. $125
01-15-2018, 04:22 PM
#5
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Roller Cam
Great cam for 383 or 406. Good lope and street able with efi or carb
Trending Topics
06-08-2018, 12:46 PM
#9
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Perrysburg, Ohio
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Firebird
Engine: 400 sbc
Transmission: TH400
Axle/Gears: Ford 9" 3.50 35 Spline
Re: Roller Cam
To clarify this would be a retro roller.
