[NJ] 85 drag car partout.
05-12-2018, 03:29 PM
#1
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
85 drag car partout.
Parting an 85 drag chassis.
***Chassis now being parted
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
Sparco evo2 seat and 5pt harness, nce shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm m
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon county NJ
-Phil
***Chassis now being parted
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
Sparco evo2 seat and 5pt harness, nce shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm m
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon county NJ
-Phil
Last edited by //<86TA>\\; 07-31-2018 at 05:35 PM.
05-12-2018, 03:34 PM
#2
05-12-2018, 03:39 PM
#3
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Last edited by //<86TA>\\; 07-31-2018 at 05:36 PM.
05-12-2018, 07:47 PM
#5
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Your a little over 2hrs from me, i could drive it to you for less than shipping, but it won't fit in my car and I don't want to drive my Jeep that far either, lol.
Let me see what I can do.
Let me see what I can do.
Trending Topics
05-14-2018, 10:09 AM
#9
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: 85 drag car partout.
Is the housing stock width?
-- Joe
-- Joe
05-14-2018, 11:16 AM
#10
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Yes
05-14-2018, 12:31 PM
#12
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
I won't separate it at this price. Sounds like you would be better off just getting a new houses ng and axle package, last time I looked the were still under a grand.
05-14-2018, 01:04 PM
#13
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,723
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: 85 drag car partout.
-- Joe
05-14-2018, 01:35 PM
#14
05-15-2018, 05:27 AM
#16
Want a title? Post!
Join Date: Nov 2016
Location: SPb, Russia
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird T/A GTA 88 hardtop
Engine: SBC 350 tpi
05-15-2018, 06:56 PM
#17
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
No I won't ship overseas, sorry
05-15-2018, 08:27 PM
#19
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Yes I will part the chassis
05-15-2018, 08:28 PM
#20
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Axle sold
05-16-2018, 02:22 AM
#21
Want a title? Post!
Join Date: Nov 2016
Location: SPb, Russia
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firebird T/A GTA 88 hardtop
Engine: SBC 350 tpi
05-17-2018, 11:03 AM
#22
Senior Member
Join Date: Jan 2005
Location: Port Angeles, Wa
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Z28
Engine: 584
Transmission: TSI Glide
Axle/Gears: Quick performance 9 inch
Re: 85 drag car partout.
Very interested in the fuel tank! I didn't see any pics though. Can you send pics of it to me? Nice and clean inside? Rusty?
Pm me and I'll shoot you my email. Thanks!
Pm me and I'll shoot you my email. Thanks!
05-17-2018, 08:31 PM
#23
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Pulled the tank, clean inside and out.
05-17-2018, 08:37 PM
#24
Junior Member
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: 85 drag car partout.
Hi, are those headers stepped? They are for standard sbc heads right? Thanks.
05-18-2018, 08:33 PM
#26
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
They are stepped 1 7/8 to 2". They are made for these cars, they are for Stahl pattern sbc heads, not standard sbc heads
05-20-2018, 08:31 AM
#27
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Coilovers sold
05-20-2018, 10:32 AM
#28
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Hood and passenger side door sold
05-31-2018, 04:45 PM
#30
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Bump
06-03-2018, 04:29 PM
#31
Junior Member
Join Date: Jun 2016
Location: New Hampshire
Posts: 2
Received 0 Likes
on
0 Posts
Car: 1984 camaro z28
Engine: 5.7L
Transmission: T5 s speed
Axle/Gears: Not sure yet
Re: 85 drag car partout.
Do you still have the torque arm? How much would it be to ship it to 03561? I am seriously interested in it.
06-04-2018, 05:19 PM
#32
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Probably 45-50$ based on the last couple shipments
06-05-2018, 07:21 AM
#33
Junior Member
Join Date: Jun 2017
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: 85 drag car partout.
Parting an 85 drag chassis.
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
06-05-2018, 04:54 PM
#34
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
It's sold , I didn't remove the pic
06-05-2018, 05:05 PM
#36
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
The newest 3rd gen is 26 years old, so yeah, any original parts will most likely be showing their age
06-07-2018, 04:24 PM
#37
Member
Join Date: Aug 2015
Location: Columbia, SC
Posts: 147
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Camaro RS
Engine: 383
Transmission: TH400
Axle/Gears: 9 inch, 35 spline drag spool,4.56
Re: 85 drag car partout.
Parting an 85 drag chassis.
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
***Chassis now being parted.
Almost new passenger side trans am fender 100$
Good driverside fender, stress crack right behind headlight 40$
Core support section 100$
Both battery trays are rust free, will cut out. 30$ each
Decent driverside door some hols on bottom 50$
Good working hatch struts 10
Good hatch with decent wrap around wing, wing was painted 100$
85-90 trans am tail lights, little or no delamination, passenger side reflector strip cracked 80$
85-92 base/formula tail lights good shape 40$
85-90 ground effects, door and quarter decent shape 50$ for all
Good 85-90 trans am/gta rear bumper with "Pontiac" logo. 50$
Patch panels, floors crossmembers Ask
Tube steering column, bolts in, with custom hanging gas and brake pedals, grant quick connect wheel with momentary push button. 200$
Manual rack and tubular crossmember, needs to be welded in or fabbed to bolt in place of sway bar, 100$
Sparco evo2 seat and 5pt harness, very nice shape, expired sfi. 200$
Properly sumped factory tank, 2. 1/2npt outlets. 100$
Gas door 5$
Bmr Trac pack style full adjustable torque arm, weld in crossmember style. 150$
I'll cut the roof off the car and remove the cage if somebody wants to try and use it somehow. Pm me
Th400 chromoly driveshaft, 1350joints with yoke 43.5 c to c. 250$
Th400 trans crossmember, no TA mount. 25$
Aerospace lightweight front brake kit with spindles. 500$
Racecraft chromoly k member and coilover a arms, clean and ready to go. 500$
Rod ended LCA and panhard bars, probably chromoly. 150$
Light weight front bumper support, replaces inpact bar. 40$
85-90 gta bumper cover, no tears overall good shape. 100$
1 7/8x2 hedman hustler Stahl pattern sbc headers with flat 3.5" collectors. Surface rust, totally badass looking. Would fit ankiller small block with matching heads or great Wall hangers for man cave. 250$
Other parts will be available separate if the body doesn't sell
PRICES DO NOT INCLUDE SHIPPING!!!!
Pm or call/text 9082689201
Hunterdon count
-Phil
06-07-2018, 07:05 PM
#38
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Yes the brakes are available
06-20-2018, 07:27 PM
#39
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
Ttt
07-09-2018, 07:49 PM
#40
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
.
Last edited by //<86TA>\\; 07-09-2018 at 10:02 PM.
07-09-2018, 10:05 PM
#43
07-23-2018, 07:35 PM
#45
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
No it's gone, was for a th400 anyway
07-25-2018, 09:23 PM
#46
Member
iTrader: (7)
Join Date: Aug 2011
Location: Plaistow,NH
Posts: 413
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Camaro Z
Engine: 350
Transmission: Built TH350 with 3200 stall
Axle/Gears: 4th gen, 4.10
Re: 85 drag car partout.
Hello, do you still have the adjustable torque arm and driveshaft loop? If you do how much are you asking for it?
Thanks
Pat
Thanks
Pat
07-25-2018, 11:20 PM
#47
Senior Member
Re: 85 drag car partout.
Are the back quarters rust free? I need both lower rear sections, and the rear passenger side rocker arm mounting are sheet metal.
IF the passenger side rocker box (the frame) ill take that too if its not rusted.
<- restoring my high school car...
IF the passenger side rocker box (the frame) ill take that too if its not rusted.
<- restoring my high school car...
07-26-2018, 04:44 AM
#48
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: 85 drag car partout.
I think the driverside is good, the passenger side kissed a wall and has rotting in the spare tire well.
07-26-2018, 11:56 AM
#50
Senior Member