Hi guys, I am looking for a set of the non self aligning type SBC rockers/fulcrums. Just your run of the mill crusty rockers will do as long as they do not show any irregular wear. I have a set of self aligning type on my heads but I am swapping some aftermarket heads w/ guide plates on, and I don't want self aligning rockers AND guide plates.

I had a ton of extra non self aligning stock rockers kicking around, so many in fact that I threw them out. Now I need some .... ARGH!

 

I think i still have my original set laying around with the pushrods too if you want them. I will take a look for them tomorrow. they are in good condition, nothing wrong with them.

 

I can't use the pushrods, this is for an aftermarket set of heads with retrofit roller rockers. I will need a pic, to see if they are self aligning type, or non self aligning type. If they came from a TPI/TBI car they may be self aligning, and not what I need. I already have a self aligning set off a pair of 081 TPI heads. Can you take a pic for me?

 

Sorry i didnt get back to you sooner, the rockers i have are self aligning so they wouldnt be what you are looking for.