WTB: engine and Tranny
Thread Starter
Junior Member
Joined: Dec 2007
Posts: 13
Likes: 0
From: monroe,nc
Car: 1988 Chevrolet Camaro
Engine: 2.8 V6 Multi port injection
WTB: engine and Tranny
Hey guys im new to this site but i am in desperate need of some parts. Today i took my 1988 camaro down to the shop and come to find out my engine is shot, according to the mechanic the crank shaft hanger to hold it in place is gone and the crank shaft is moving destroying the engine. so now im in desperate need of an engine. im looking for:
V6:
2.8
3.1
V8:
305
327
350
383
i would lik to have the transmission with it if at all possible. i need all wiring and ECU and main components to make a full swap. i prefer a 5 spd tranny. i dont need ne thing fancy or built, just something to get it back on the road. i have about $1000 to spend so plz if u got the stuff i need plz help me out. Thanks. peace,Travis
V6:
2.8
3.1
V8:
305
327
350
383
i would lik to have the transmission with it if at all possible. i need all wiring and ECU and main components to make a full swap. i prefer a 5 spd tranny. i dont need ne thing fancy or built, just something to get it back on the road. i have about $1000 to spend so plz if u got the stuff i need plz help me out. Thanks. peace,Travis
Joined: Jul 2002
Posts: 1,983
Likes: 6
From: Stamford, New York
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: WTB: engine and Tranny
I got an '84 berlinetta, full digital interior with a strong running carbeurated 2.8 V6 up to a 700R4. Only issue is NY.
Joined: Jul 2002
Posts: 1,983
Likes: 6
From: Stamford, New York
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: WTB: engine and Tranny
didn't know if you were interested in a digital swap into your car and it was cheap so i figured i'd offer. good luck!
Joined: Jul 2002
Posts: 1,983
Likes: 6
From: Stamford, New York
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: WTB: engine and Tranny
$700 OBO just cause it's rare to find a berlinetta that all the digital things work in it. Interior is a nice dark blue. Front clip is just about perfect. Doors are ok, no real body damage other than rust. Complete for the most part, only issue other than body is the roof liner really.
Last edited by 84redta; Dec 4, 2007 at 03:08 PM.
Trending Topics
Re: WTB: engine and Tranny
i have a 2.8 v6 still attached to its 700r4, wiring harness and computer. missing a few accessories (id have to check on the exact ones). ill basically take whatever you want to give me for it. its in south new jersey, depending on offer and location i may be able to meet you somewhere. if you want pics i can do that for you as well.
Thread Starter
Junior Member
Joined: Dec 2007
Posts: 13
Likes: 0
From: monroe,nc
Car: 1988 Chevrolet Camaro
Engine: 2.8 V6 Multi port injection
Re: WTB: engine and Tranny
i will keep u all in mind. ive still got a few local things 2 look at. if ne one can beat the price of $600 for a 2.8 v6 with all wiring and everything than u lmk. i haver a good working v6 tranny, i only need new tranny if upgrading to 305 or bigger. thanx alot guys for the help. peace.
Supreme Member
iTrader: (27)
Joined: Jan 2006
Posts: 1,477
Likes: 0
From: Ct
Car: 1989 Iroc, 1987and 1989 formula 350
Engine: 305tpi,350tpi,ls1
Transmission: 700r4,t-56
Axle/Gears: 3:08,3:27,3:23
Re: WTB: engine and Tranny
i will keep u all in mind. ive still got a few local things 2 look at. if ne one can beat the price of $600 for a 2.8 v6 with all wiring and everything than u lmk. i haver a good working v6 tranny, i only need new tranny if upgrading to 305 or bigger. thanx alot guys for the help. peace.
also have a complete 5-speed swap for a v-6 if interested
Thread Starter
Junior Member
Joined: Dec 2007
Posts: 13
Likes: 0
From: monroe,nc
Car: 1988 Chevrolet Camaro
Engine: 2.8 V6 Multi port injection
Re: WTB: engine and Tranny
that is possible, how many miles on it? i have a v6 tranny already that is a 5spd. i would have to look n2 shipping. no way that i could pic it up.
Junior Member
iTrader: (1)
Joined: Nov 2007
Posts: 38
Likes: 0
From: Hampton Virginia
Car: 2001 SS Camaro
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.73
Re: WTB: engine and Tranny
Ive got a 305 from an 89 t/a with 125k on the motor(needs valve seals....small puffs of oil smoke on start up and it goes awy) and a 700r4 tranny with only 6k miles on it.also have all wiring and everything your needing. Engine runs great and tranny works great.Asking 1000 dollars for everything.
Re: WTB: engine and Tranny
you can have everything i have for 150, if you want a spare trans for parts. its from an 87 and had 130000 miles on it, was running ok when pulled for a v8 swap. shipping would probably be killer, but i can check it out if you like
Junior Member
iTrader: (10)
Joined: Nov 2005
Posts: 69
Likes: 0
From: delavan wiscons
Engine: 350
Transmission: t-5
Re: WTB: engine and Tranny
i have a t-5 our a 91 camaro 305 tpi motor. and a b&m ripper short throw shifter. im asking 500 for the tranny with clutch
I also have 2 400 short blocks. one with 10k on it with forged pistons, asking 500 and the other is stock .040 over stock and only 5k on it and im asking 300 but it needs a new crank or the treads drilled and taped.
I also have 2 400 short blocks. one with 10k on it with forged pistons, asking 500 and the other is stock .040 over stock and only 5k on it and im asking 300 but it needs a new crank or the treads drilled and taped.
Thread Starter
Junior Member
Joined: Dec 2007
Posts: 13
Likes: 0
From: monroe,nc
Car: 1988 Chevrolet Camaro
Engine: 2.8 V6 Multi port injection
Re: WTB: engine and Tranny
i will let all u guys kno, currently tryin to work a deal locally, we will see wat happens. thanx guys for the help.
Re: WTB: engine and Tranny
I have 350 TPI and a 700r4 tranny if interested. I will take $400 for both.
Motor and tranny are strong. You can email me directly or call.
deinasfan39@yahoo.com 817-386-0393 We are in Fort Worth, Texas
Motor and tranny are strong. You can email me directly or call.
deinasfan39@yahoo.com 817-386-0393 We are in Fort Worth, Texas
Junior Member
Joined: Oct 2004
Posts: 43
Likes: 1
From: New Port Richey, FL
Car: 02 UltraZ, 85 Z28, 98 WS6, 86 Vette
Engine: LS1, SBC 383, LS6, LS2, LQ9
Transmission: T-56, TH400, 4L60E,
Axle/Gears: 3.42s, 3.73s, 4.10s
Re: WTB: engine and Tranny
I have a 305 and a 700R4. i'm in the process of putting all new bearings, rings and seals in. it has 350 heads. also, I have a rebuild kit for the tranny too. I was going to convert my 85 Z28 into a DD, but scratched that plan and am sticking to my stroker and 400 tranny.
Thread Starter
Junior Member
Joined: Dec 2007
Posts: 13
Likes: 0
From: monroe,nc
Car: 1988 Chevrolet Camaro
Engine: 2.8 V6 Multi port injection
Re: WTB: engine and Tranny
i think i have decided 2 let her go. i have the car on sale on here. if u want link lmk. $1000 obo
Thread
Thread Starter
Forum
Replies
Last Post
TA8487
Engine/Drivetrain/Suspension Wanted
1
Aug 16, 2015 12:21 PM
Mister_Johnny99
Interior Parts Wanted
0
Aug 14, 2015 12:59 PM
Zachattack0925
Tech / General Engine
2
Aug 12, 2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM





