need to replace V6 block
Thread Starter
Supreme Member
iTrader: (7)
Joined: Jan 2009
Posts: 1,176
Likes: 4
From: Moneta, VA
Car: 88 GTA
Engine: 305 TPI
Transmission: WC T5
Axle/Gears: BW 9-bolt 3.27 posi
need to replace V6 block
My son has an 87 bird with a 2.8 V6. The block is cracked. We would like to find a replacement block, but would also be interested in a larger 60 degree engine to swap in... we'd like to do a rebuild, so condition is not important as long as it can be rebuilt.
We are open to any/all options.
We are open to any/all options.
Supreme Member
iTrader: (27)
Joined: Jan 2006
Posts: 1,477
Likes: 0
From: Ct
Car: 1989 Iroc, 1987and 1989 formula 350
Engine: 305tpi,350tpi,ls1
Transmission: 700r4,t-56
Axle/Gears: 3:08,3:27,3:23
Re: need to replace V6 block
My son has an 87 bird with a 2.8 V6. The block is cracked. We would like to find a replacement block, but would also be interested in a larger 60 degree engine to swap in... we'd like to do a rebuild, so condition is not important as long as it can be rebuilt.
We are open to any/all options.
We are open to any/all options.
Junior Member
iTrader: (3)
Joined: Aug 2008
Posts: 60
Likes: 0
From: the big ol nc
Car: 88 t/a tpi ported polished bolt ons
Engine: lb9 got 406 on paymnt wow FI 406
Transmission: 700r4
Axle/Gears: 99 z28 342 in back
Re: need to replace V6 block
i got long blck l69 out of 85 hard top t/a buddy of mine has a 4 bolt totally disassembled for 400 ill take 150 4 the L69(305 ho ) cam is 425-475) i think i got elb street master ill thro for 45 more and 600 eld for 100 if u interested pm me pick up only in NC NEAR GALAX/MT AIRY (ELKIN SURRY COUNTY)
Thread
Thread Starter
Forum
Replies
Last Post