[MD] engine and trans wanted
Thread Starter
Junior Member
Joined: Dec 2008
Posts: 65
Likes: 0
From: Bel Air Maryland
Car: 1991 Camaro RS
Engine: 305 Small Block
Transmission: Auto
Axle/Gears: Factory
engine and trans wanted
looking for a 350 motor that runs well with low miles and a manuel trans,,,,going into a 91 camaro....305 auto trans sucks
Junior Member
Joined: Apr 2005
Posts: 11
Likes: 0
From: ASHLAND VA
Car: 88 IROC-Z , 00 CAMARO SS
Engine: BUILT 5.7 IN THE IROC, STOCK LS1 IN THE SS
Transmission: 700R4 , 4L60E
Re: engine and trans wanted
I have a complete 5.7 tpi engine. comes with all accessories,wiring harness,computer,ect. everything needed to drop in and go. engine has a comp cam and bolt ons. runs great and only 9000 miles on it. Lots of money in this engine. I will sell it for $2500. I dont have a trans so I cant help you there. I am in VA so we are not to far away. You can hear it run and ride in the car. let me know and feel free to make an offer.
Thread Starter
Junior Member
Joined: Dec 2008
Posts: 65
Likes: 0
From: Bel Air Maryland
Car: 1991 Camaro RS
Engine: 305 Small Block
Transmission: Auto
Axle/Gears: Factory
Re: engine and trans wanted
I have a complete 5.7 tpi engine. comes with all accessories,wiring harness,computer,ect. everything needed to drop in and go. engine has a comp cam and bolt ons. runs great and only 9000 miles on it. Lots of money in this engine. I will sell it for $2500. I dont have a trans so I cant help you there. I am in VA so we are not to far away. You can hear it run and ride in the car. let me know and feel free to make an offer.
Junior Member
Joined: Apr 2005
Posts: 11
Likes: 0
From: ASHLAND VA
Car: 88 IROC-Z , 00 CAMARO SS
Engine: BUILT 5.7 IN THE IROC, STOCK LS1 IN THE SS
Transmission: 700R4 , 4L60E
Re: engine and trans wanted
i would consider about $1900 but that is probobly as low as i could go. thats a great price for a complete takeout.
Member
iTrader: (10)
Joined: Jul 2008
Posts: 426
Likes: 2
From: Binghamton, NY
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
Re: engine and trans wanted
If you are going for a 350, you'll need a World Class T5 transmission to go with it.
I have a freshly rebuilt WC-T5, 3,000 miles on rebuild, includes B&M shifter, bellhousing, clutch disc, pressure plate, flywheel, throwout bearing, clutch fork, pilot bearing, and assembly hardware. The only thing I don't have is the hydraulics, but those are easy to get. I'll PM you price info.
I have a freshly rebuilt WC-T5, 3,000 miles on rebuild, includes B&M shifter, bellhousing, clutch disc, pressure plate, flywheel, throwout bearing, clutch fork, pilot bearing, and assembly hardware. The only thing I don't have is the hydraulics, but those are easy to get. I'll PM you price info.
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM




