[NY] WTB: 3.73 or 4.10 rear
Thread Starter
Member
iTrader: (10)
Joined: Jul 2008
Posts: 426
Likes: 2
From: Binghamton, NY
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
WTB: 3.73 or 4.10 rear
Changing my search to focus on a solid 3.73 or 4.10 gear ratio posi rear. Must be within reasonable driving distance from Binghamton, NY.
MUST HAVE:
-Posi
-3.73 or higher numerical gearing
-Reasonable price...
Thanks guys!
MUST HAVE:
-Posi
-3.73 or higher numerical gearing
-Reasonable price...
Thanks guys!
Last edited by plasmeh; Sep 6, 2009 at 03:08 PM.
Member
iTrader: (26)
Joined: Jan 2000
Posts: 264
Likes: 0
From: NY zip 12538
Car: way too many
Engine: 283s to 454s
Transmission: autos and sticks
Re: 4th Gen Rear
I have a 3:23 posi complete rear with disc brakes for $225 end to end, you got the T56 setup from me. Posi tested good and the brakes work fine.
Thread Starter
Member
iTrader: (10)
Joined: Jul 2008
Posts: 426
Likes: 2
From: Binghamton, NY
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
Thread Starter
Member
iTrader: (10)
Joined: Jul 2008
Posts: 426
Likes: 2
From: Binghamton, NY
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
Re: 4th Gen Rear
Is this a 3-channel or 4-channel brake line rear? Definitely interested either way.
Banned
iTrader: (12)
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: 4th Gen Rear
FYI......
93-97 have the same sized rotors & the same PBR calipers as late 3rd gens & the 98-02 have bigger rotors & better calipers.
And the 98-02 rears are bit narrower than the 93-97, although still wider than a 3rd gen rear.
93-97 have the same sized rotors & the same PBR calipers as late 3rd gens & the 98-02 have bigger rotors & better calipers.
And the 98-02 rears are bit narrower than the 93-97, although still wider than a 3rd gen rear.
Trending Topics
Thread Starter
Member
iTrader: (10)
Joined: Jul 2008
Posts: 426
Likes: 2
From: Binghamton, NY
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
Re: 4th Gen Rear
Still looking for a rear guys, keep em coming!
Member
iTrader: (26)
Joined: Jan 2000
Posts: 264
Likes: 0
From: NY zip 12538
Car: way too many
Engine: 283s to 454s
Transmission: autos and sticks
Re: WTB: 3.73 or 4.10 rear
I have a rebuilt 10 bolt posi rear with 3:73 gears, complete end to end with disc brakes for $400. Currently in a 94 trans am. Also has aftermarket lower control arms available for an extra $75.
Thread Starter
Member
iTrader: (10)
Joined: Jul 2008
Posts: 426
Likes: 2
From: Binghamton, NY
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
Re: WTB: 3.73 or 4.10 rear
That's a lot closer to home on what I wanted. Give me a couple days on that one to get the money around and I'll get ahold of you to see if you still have it. Don't need the control arms. 3 or 4 channel?
Thread Starter
Member
iTrader: (10)
Joined: Jul 2008
Posts: 426
Likes: 2
From: Binghamton, NY
Car: 1986 IROC-Z
Engine: 360cu @ 10.5:1
Transmission: T56 - Pro 5.0
Axle/Gears: 4.10 - Zexel Torsen - Moser Axles
Re: WTB: 3.73 or 4.10 rear
Lost my job today so I'll have to pass for now until I can find a new job. I'll contact you to see if you still have it. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
Dec 11, 2023 08:14 AM
hectre13
Engine/Drivetrain/Suspension Parts for Sale
7
Aug 26, 2015 08:17 AM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
TA8487
Engine/Drivetrain/Suspension Wanted
1
Aug 16, 2015 12:21 PM
Mister_Johnny99
Interior Parts Wanted
0
Aug 14, 2015 12:59 PM





