[IL] '165 ECM Donor harness
Thread Starter
Member
iTrader: (9)
Joined: Aug 2007
Posts: 338
Likes: 2
From: Lafayette, IN
Car: '85 IrocZ
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.73
'165 ECM Donor harness
Hey guys,
I'm looking for a '165 ECM harness from an '86-'89 TPI vehicle. I'm doing the 85ecm swap and instead of splicing these wires because I hear its a pain in the a**, I just need the connector that would plug into the ECM and about a foot's worth of the wires up the harness. I DONT need the entire harness, just enough for me to splice together and the connector for the ECM.
Thanks!
I'm looking for a '165 ECM harness from an '86-'89 TPI vehicle. I'm doing the 85ecm swap and instead of splicing these wires because I hear its a pain in the a**, I just need the connector that would plug into the ECM and about a foot's worth of the wires up the harness. I DONT need the entire harness, just enough for me to splice together and the connector for the ECM.
Thanks!
Junior Member
Joined: Feb 2009
Posts: 13
Likes: 0
From: Fenton, MI
Car: 87 T/A * 86 T/A
Engine: 305 TPI * 305 4bbl.
Transmission: Manual * Auto
Re: '165 ECM Donor harness
Is there any difference in this harness from a T/A to a Camaro? I'm parting out an 87 T/A, 305 TPI, and could cut the harness out easily. Not too far away either, in MI, so shipping shouldn't be much.
Thread
Thread Starter
Forum
Replies
Last Post