Hi everyone,

I am having some trouble restoring my car because I am hung up with the cruise control. I have attached some pics to show what is going on, but to make a long story short, the current vaccum servo unit that runs wires through the firewall and a cable to the throttle is not what I have seen anywhere. The pictures will show. Also, the genius before me cut 3 of the eight wire harness that comes from the servo as it comes through the firewall. Why, I have no clue. The wires from the servo are as follows: Blue, Green, Gray, Yellow, Brown, Red, Purple, and Black. I believe I would need a new servo and a new harness, but any help or insight into this would be greatly appreicated. Please, anyone feel free to let me know what you think.

Kind Regards,

Steve

 

Thats not factory

Ive got a complete OEM cruise setup from my 92 firebird if youd like to go that route. All wiring is included and is uncut

 

Hey buddy, I sent you a private message. Let me know when you get it. I am greatly interested!

 

I got it

This is finals week so I dont have alot of time to go rummaging through the garage. If I get a spare hour or get sick of cramming Ill pull the stuff out and take a group pic for you

 

Thats great buddy, no rush, just wanted to make sure you received it. Let me know when you get time. And please, don't rush. I know how important studying for finals can be!