TBI setup needed..
Thread Starter
Junior Member
iTrader: (8)
Joined: May 2008
Posts: 33
Likes: 0
From: Wall, TX
Car: 1989 Camaro RS
Engine: Soon to be LS.
Transmission: Auto
Axle/Gears: Need some
TBI setup needed..
I am looking for a TBI setup for a 350. The car was once a v6, and the previous owner (if you can call him that), put in a 350 which I had to carb due to his wonderful swap job. I am now wanting to swap to a tbi setup just so I can drive the car until I put the 5.3 in it. I have a brand new Holley 600 cfm that I have started the vehicle up about 3 times with that I would be willing to trade. Let me know what you have, and I will see if we can work something out.
Banned
iTrader: (5)
Joined: Oct 2012
Posts: 90
Likes: 0
From: Maryland
Car: Camaro
Engine: 350
Transmission: 6 Speed
Axle/Gears: 9 bolt 370
Re: TBI setup needed..
I am looking for a TBI setup for a 350. The car was once a v6, and the previous owner (if you can call him that), put in a 350 which I had to carb due to his wonderful swap job. I am now wanting to swap to a tbi setup just so I can drive the car until I put the 5.3 in it. I have a brand new Holley 600 cfm that I have started the vehicle up about 3 times with that I would be willing to trade. Let me know what you have, and I will see if we can work something out.
More parts at
http://www.facebook.com/ThisWeekInCamaro
443-527-9573 Jason
Thread Starter
Junior Member
iTrader: (8)
Joined: May 2008
Posts: 33
Likes: 0
From: Wall, TX
Car: 1989 Camaro RS
Engine: Soon to be LS.
Transmission: Auto
Axle/Gears: Need some
Re: TBI setup needed..
How much will you do a complete setup for? I do not need the intake manifold.
Banned
iTrader: (5)
Joined: Oct 2012
Posts: 90
Likes: 0
From: Maryland
Car: Camaro
Engine: 350
Transmission: 6 Speed
Axle/Gears: 9 bolt 370
Member
iTrader: (22)
Joined: Feb 2003
Posts: 371
Likes: 0
From: Claremont, North Carolina
Car: 1990 Formula Firebird
Engine: 305TBI w/ Functional Sport Hood CAI
Transmission: 700R4
Axle/Gears: SLP Posi and 3.23 Gears
Re: TBI setup needed..
I have a complete TBI setup if you'd like a 2nd offer PM me
if you wanted for some extra money I would do the Ultimate TBI Mod to it like this one I did:
This is someone else's throttle body before they did the mod (NEEDforSPEED), the mod is supposed to increase air flow by ~15%. stock is 480cfm I believe, so with the mod you would have around 550cfm.
if you wanted for some extra money I would do the Ultimate TBI Mod to it like this one I did:
This is someone else's throttle body before they did the mod (NEEDforSPEED), the mod is supposed to increase air flow by ~15%. stock is 480cfm I believe, so with the mod you would have around 550cfm.
Last edited by LedZep; Feb 5, 2013 at 09:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post