1987 Camaro Needs AC Connector and Cat
#1
Member
Thread Starter
Join Date: Jun 2002
Location: Ebony, VA
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z; 2012 Ford Raptor
Engine: Modified 350
Transmission: 700R4
1987 Camaro Needs AC Connector and Cat
Hi,
Need a cat for the 87 camaro, IROC, 350. Installed is the Edelbrock headers with AIR, and the Borla exhaust. Need the cat with the bolted flat flange at the one end to be supported by the hanger bracket and the tube on the other end. Its like stock, but i was using the aftermarket brands. I need at least the shell, so it doesn't need to work and can be empty. I need it to pass Virginia inspection. I have a straight pipe now because i was in Ohio and no inspections were done there.
Need the connector side for the AC low pressure switch. Don't need the switch. I need a good connector with some wire to replace my broken one.
Will pay fair price and shipping.
Thanks,
Scott
Need a cat for the 87 camaro, IROC, 350. Installed is the Edelbrock headers with AIR, and the Borla exhaust. Need the cat with the bolted flat flange at the one end to be supported by the hanger bracket and the tube on the other end. Its like stock, but i was using the aftermarket brands. I need at least the shell, so it doesn't need to work and can be empty. I need it to pass Virginia inspection. I have a straight pipe now because i was in Ohio and no inspections were done there.
Need the connector side for the AC low pressure switch. Don't need the switch. I need a good connector with some wire to replace my broken one.
Will pay fair price and shipping.
Thanks,
Scott
Thread
Thread Starter
Forum
Replies
Last Post
FormulaLT
Engine/Drivetrain/Suspension Wanted
2
09-18-2011 03:49 PM
Firebat
LTX and LSX
1
05-11-2006 04:27 PM
john5.7 87Iroc
Electronics
7
12-01-2004 04:34 PM
blue86iroc
Tech / General Engine
3
04-28-2003 07:56 AM