MAP sensor and bracket
Thread Starter
Joined: Mar 2017
Posts: 4,255
Likes: 427
From: Portland, OR
Car: 86 Imponte Ruiner 450GT, 91 Formula
Engine: 350 Vortec, FIRST TPI, 325 RWHP
Transmission: 700R4 3000 stall.
Axle/Gears: 9 Bolt Torsen 3.70
MAP sensor and bracket
Swapping to EBL. For my 86 Trans Am.
Thanks,
GD
Thanks,
GD
Joined: Dec 2004
Posts: 16,774
Likes: 1,002
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: MAP sensor and bracket
Doesn’t it mount on the bulkhead?
tpi 90-92 mounts on a bracket on a boss on the plenum.
tpi 90-92 mounts on a bracket on a boss on the plenum.
Joined: Aug 2009
Posts: 1,821
Likes: 40
From: Central California
Car: 92 Camaro RS
Engine: LO3
Transmission: T5
Axle/Gears: stock
Re: MAP sensor and bracket
Yes' the TBI one does. Just asking to make sure which one he wanted
I'm really lo tech. Not familiar with EBL
I'm really lo tech. Not familiar with EBL
Thread Starter
Joined: Mar 2017
Posts: 4,255
Likes: 427
From: Portland, OR
Car: 86 Imponte Ruiner 450GT, 91 Formula
Engine: 350 Vortec, FIRST TPI, 325 RWHP
Transmission: 700R4 3000 stall.
Axle/Gears: 9 Bolt Torsen 3.70
Re: MAP sensor and bracket
Well I'm not really sure.... I will be going to the First intake.... not sure if that has the bosses. My current intake is the 86 TPI intake. I'm installing the EBL prior to the engine / First intake install so as not to make too many changes at one time..... From what I have read the TBI and TPI use the same sensor.... if there is a bracket that will mount to the 86 bulkhead that would probably be ideal.
GD
GD
Thread
Thread Starter
Forum
Replies
Last Post
TPIMonteLS
Engine/Drivetrain/Suspension Wanted
11
Jun 23, 2012 06:12 PM