[TX] A/C Compressor Brackets
#1
A/C Compressor Brackets
I'm looking to purchase a set of air condition compressor brackets for an 87 Camaro with a 5.0 TPI engine. The compressor is mounted on the driver side and i believe the set includes around 7 or 8 pieces. I am also interested in purchasing the OEM hoses that bolt to the back of the compressor and even the compressor if it is still operable. The attached photograph is of the single bracket that is holding the compressor on my vehicle along with the aftermarket freon hoses. Thanks in advance!
.
James
.
James
#4
Junior Member
iTrader: (19)
Re: A/C Compressor Brackets
I'm looking to purchase a set of air condition compressor brackets for an 87 Camaro with a 5.0 TPI engine. The compressor is mounted on the driver side and i believe the set includes around 7 or 8 pieces. I am also interested in purchasing the OEM hoses that bolt to the back of the compressor and even the compressor if it is still operable. The attached photograph is of the single bracket that is holding the compressor on my vehicle along with the aftermarket freon hoses. Thanks in advance!
.
James
.
James
#5
Supreme Member
iTrader: (167)
Re: A/C Compressor Brackets
James;
( You might know this already; but: ) If you look at the 2 pics below you will see that you are using ( at least) 1 of the AC brackets wrong right now. The one you have at the back/top of the compressor to hold it up should be mounted on the front of the compressor.
Here's a pic from last night:
I might have the rod type bracket(s?) too,..... but I've got no way right now to confirm what rod type bracket is the right length.
Haven't looked into shipping yet because I don't have a good box at the ready and might have to make 1; the box will be kinda' big due to the AC lines. I'll be on the lookout for a box this afternoon.
( You might know this already; but: ) If you look at the 2 pics below you will see that you are using ( at least) 1 of the AC brackets wrong right now. The one you have at the back/top of the compressor to hold it up should be mounted on the front of the compressor.
Here's a pic from last night:
I might have the rod type bracket(s?) too,..... but I've got no way right now to confirm what rod type bracket is the right length.
Haven't looked into shipping yet because I don't have a good box at the ready and might have to make 1; the box will be kinda' big due to the AC lines. I'll be on the lookout for a box this afternoon.
Thread
Thread Starter
Forum
Replies
Last Post
KED85
V6
8
06-27-2002 10:42 AM