Looking to add TPI to my 305 TBI. Looking to keep it cheap and preferably the MAP style. I'm located around Jacksonville, NC.

 

What do u mean by "complete "?

 

Just the baseplate, fuel rails, runners, plenum and maybe throttle body, preferably with all the bolts.

 

I have a complete system from an 88 corvette with only 9,800 miles but it is not cheap.

 

I understand but i have to ask, how much do you want for it?

 

I have parts I can put together a tpi but unfortunately I only have 85-88 plenums and a corvette base that’s 90 degrees center holes that would need to be elongated to fit 72 degree bolt heads.

 

I have a set up from my 89 I could sell you. The plenum and runners are hand polished. The runners need a little TLC. Intake fuel rail with 24lb injectors and adjustable BBk fuel pressure regulator. I bought a FIRST setup so I have no need for it. I do not have the torque bolts though

 

Do you mean a base for Vortec heads? I'm not sure what you mean.

 

Reggie how much would you want for it?

 

not vortec but on sbc center intake holes are at 72 degrees on the vette 128 and 113 heads 90 degrees.
so to correct you elongate the intake center 4 holes .
i have a lot of plenums to choose from a polished one, stock runners 85-88 throttle body.
can put together with your choice of parts for $300 plus ride no harness or ecm just intake.

 

Oh okay I see, thank you

 

Have a 90-92 lower and rails. I work in Fayetteville, NC.

 

$1400 shipped insured CONUS.

 

Pics. Passenger side runner has dents but I have anew oem set I have not put on yet.

It is actually from a 90 vette with 9,800 miles

 

even if nos 90-91 that would be hard push to sell at that rice point
https://www.thirdgen.org/forums/engi...-complete.html

 

Honeslty I’m not sure. It’s kinda nice stock set up. I might be able to mount it together tomorrow with an Allan head set I have and take a picture. There is the air foil with the throttle body as well. The runner polishing is no where near perfect. Injectors only have 7000 miles on them but they are 13 years old and need new o rings to the intake. $700 I think would be fair but I would want you to see pics first

 

https://www.facebook.com/marketplace/item/966605180705471/
great deal can’t tell in pictures if 89 or 85-88 without seeing the intake plenum front.
if you need other parts to complete I have that’s just cheap for a clean base.

 

Well I'm sorry everyone, y'all have some very nice offers but I got a great deal on a complete L98 in town so I'm just gonna work with that. Thank y'all! Have a nice day

 

Still at all looking?

 

i have a complete one off a 92 pm or text me my number is (612) 860-2513