Why would ALDL not work after swap??
Thread Starter
Member
Joined: Mar 2002
Posts: 385
Likes: 0
From: Saint Cloud, FL
Car: 92 Camaro RS
Engine: 350
Transmission: 700R4
Axle/Gears: 3.73 Truetrac
Why would ALDL not work after swap??
I swaped my 2.8 for a 350 and now my ALDL does not work, why nothing changed under there but the computer what would cause this, and yes it worked before the swap, any ideas on what to do or what to check?
Guest
Posts: n/a
The ALDL connects to the ecm through the IP harness (instrument panel) its a white/clear connector near the ecm. Make sure its hooked up, and make sure the wiring is the same from the 2.8 to whatever setup you swapped to. It probably is, but I'm not positive so I wont say its the same.
Thread Starter
Member
Joined: Mar 2002
Posts: 385
Likes: 0
From: Saint Cloud, FL
Car: 92 Camaro RS
Engine: 350
Transmission: 700R4
Axle/Gears: 3.73 Truetrac
Yeah the conector for the dash is conected, everything elce in the entire car works, gages ect. except the ALDL. Maybe someone could help and tell me what color to what pins for the ALDL conector or where I could find a diagram of that, I figured it would have had to be the same since everything elce works.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 8, 2015 08:16 PM
rsrmoore
Transmissions and Drivetrain
1
Aug 7, 2015 08:44 PM
