Third Generation F-Body Message Boards

Engine Swap Everything about swapping an engine into your Third Gen.....be it V6, V8, LTX/LSX, crate engine, etc. Pictures, questions, answers, and work logs.

Will This Cam Work With A Computer?

Thread Tools
 
Search this Thread
 
Old Aug 25, 2002 | 11:15 PM
Share
  #1  
Speedyz28's Avatar
Speedyz28
Thread Starter
Junior Member
 
Joined: Jun 2002
Posts: 15
Likes: 0
Car: 1987 Z28 Camaro
Engine: 355 chevy
Transmission: TH700R4
Will This Cam Work With A Computer?
I have a cam w/ a Lobe Seperation Angle of 109, and was wondering if i had a custom prom burned would it still idle decent and run well?
Reply
0
Old Aug 26, 2002 | 06:56 AM
Share
  #2  
RB83L69's Avatar
RB83L69
Supreme Member
 
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
Depends on more than just the lobe separation... what's the rest of the specs?
Reply
0
Old Aug 26, 2002 | 09:55 AM
Share
  #3  
Speedyz28's Avatar
Speedyz28
Thread Starter
Junior Member
 
Joined: Jun 2002
Posts: 15
Likes: 0
Car: 1987 Z28 Camaro
Engine: 355 chevy
Transmission: TH700R4
The duration is 230/230 @.050" and .480/.480" lift
Reply
0
Old Aug 26, 2002 | 10:47 AM
Share
  #4  
RB83L69's Avatar
RB83L69
Supreme Member
 
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
No.

That's altogether the wrong cam for a computer setup, especially if it's a TPI.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
350 and 305
Jake_92RS
Tech / General Engine
8
Jan 28, 2020 10:37 PM
5.3 or 5.7 not sure which route to take?
jharrison5
Engine Swap
5
Aug 19, 2015 05:53 PM
Jumpy at idle and low-throttle
perZ
TPI
7
Aug 15, 2015 01:17 PM
L98 or L05?
matthew911
Engine Swap
13
Aug 12, 2015 09:38 AM
Confused about turn signal parts
Fronzizzle
Electronics
2
Aug 9, 2015 01:15 PM
Back to Subforum
Engine Swap
View Next Unread
LT4 Intake




Advanced Search

All times are GMT -5. The time now is 11:08 PM.