Motor Swap Questions
Thread Starter
Member
Joined: Jun 2002
Posts: 491
Likes: 1
From: Hockessin, Delaware
Car: Red 91 RS Camaro
Engine: LO3 with Comp Cam
Transmission: 700R4
Axle/Gears: 4th gen rear
Motor Swap Questions
How hard will it be to pull the LO3 engine out of my RS? I don't have much experience with this kind of work but I know the mechanics of how it works. I plan on rebuilding it an returning it to its place.
I'm mostly worried about the top bolt on the tranny. Whats the access down there like?
And last minute advice.
I'm mostly worried about the top bolt on the tranny. Whats the access down there like?
And last minute advice.
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
That's one of the 2 easiest bolts to get to.
You have to remove the distributor anyway. Go ahead and pull it. Once it's out of the way, you can reach down from above with a box-end 9/16" wrench and get to both of the top bolts with near zero effort.
You have to remove the distributor anyway. Go ahead and pull it. Once it's out of the way, you can reach down from above with a box-end 9/16" wrench and get to both of the top bolts with near zero effort.
Thread
Thread Starter
Forum
Replies
Last Post