BBC radiator fans?
#1
Senior Member
Thread Starter
Join Date: Jun 2001
Location: Saskatchewan
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc
Engine: 454 Demon 850DP
Transmission: TH350, 3500 stall
Axle/Gears: 3.73
BBC radiator fans?
What radiator fans are you using with your BBC. I am using the long water pump for my pulley setup and it isn't leaving much room for elecric fans.
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
If you don't have the AC condensor, you could put pusher fans on the front of the radiator.
#3
Senior Member
Thread Starter
Join Date: Jun 2001
Location: Saskatchewan
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc
Engine: 454 Demon 850DP
Transmission: TH350, 3500 stall
Axle/Gears: 3.73
I don't have the AC condensor but from what I have read the pusher fans aren't as efficient as the pullers.
Looks like I will have to lower the bottom rad tray about 1.5 inches so the 31X19 Griffing rad will stand up straight in there. Hopefully that will give me enough room to have some choice in fans.
I was hoping not to have to do that but might be the only way with the lwp.
Looks like I will have to lower the bottom rad tray about 1.5 inches so the 31X19 Griffing rad will stand up straight in there. Hopefully that will give me enough room to have some choice in fans.
I was hoping not to have to do that but might be the only way with the lwp.