Starter Question
Thread Starter
Junior Member
Joined: Aug 2004
Posts: 37
Likes: 0
From: Tallahassee Florida
Car: 92 Camaro RS Heritage Edition
Engine: 355 V8
Transmission: 700R4
Starter Question
I searched and didn't really find the answer to my question. I swapped out the 305 in my 92 RS for a 350. I kept the same 700r4 but changed the flex plate from a 153 to a 168 that fit the crank on my new engine. I am looking for which cars came with a stock 168 tooth flex plate. I want to be able to go down to Autozone and pick up the right starter for my engine without having to order one online. Thanks in advance for anyone who can help.
Supreme Member
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
get it for a '70 something car or truck, you need the offset bolt starter nose, very common
most vehicles used this one,
in the 80s and up the 153 was a bit more common, and it was very random, certain years did ando thers didnt, even in the same engine and model
virtually all 70s engines applications were 168 tooth, compared to the 80s and up
good luck
most vehicles used this one,
in the 80s and up the 153 was a bit more common, and it was very random, certain years did ando thers didnt, even in the same engine and model
virtually all 70s engines applications were 168 tooth, compared to the 80s and up
good luck
Thread
Thread Starter
Forum
Replies
Last Post
