3.1 to TPI 350 Swap
Thread Starter
Junior Member
Joined: Sep 2006
Posts: 2
Likes: 0
3.1 to TPI 350 Swap
I have a 92 camaro rs with a 3.1 v6 and I want to swap to a TPI 350. I read a few months ago that I could use the 3.1 wiring harness on the TPI with no modifications and that the computer would work as well. I have a 91 rs that had a 305 tbi. I am using the radiator and motor mounts out of it for the swap. I have an auto trans in the 3.1 and I know that I have to get a trans for the v8. Any way, I wanted to know if what I read was true or not.
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.
I don't know where you heard that, but you need a TPI harness and at least a TPI PROM.
Your '92 V6 radiator should be the same thing as the '91 V8 radiator, but no biggie, either way.
I don't know where you heard that, but you need a TPI harness and at least a TPI PROM.
Your '92 V6 radiator should be the same thing as the '91 V8 radiator, but no biggie, either way.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM
