Help identify...
Thread Starter
Senior Member
Joined: May 2007
Posts: 365
Likes: 0
From: Central Michigan.
Car: 89' Camaro RS--
Engine: 305--
Transmission: Automatic
Axle/Gears: 2.73--
Help identify...
I believe there was an engine swap in my car.. We were told it was just rebuilt but it may be from a different car... In our repair manual it says valve covers will have center bolts.. mine doesn't... It has the bolts on the edges... So then its either a different year or its got different heads on it. Using the manifold numbers can you find out what the engine came out of? if not anyway to find this out?
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Help identify...
Check the casting numbers on the heads to see what they are. The numbers on the block might also be interesting. Does it have TBI or TPI on it now?
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Help identify...
The head casting number is under the valvecovers. The block casting number is behind the driver side head.
http://www.mortec.com/location.htm
http://www.mortec.com/location.htm
Thread
Thread Starter
Forum
Replies
Last Post