swap help
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: yey AREA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 RS
Engine: 5.0 L03
Transmission: 700R4
swap help
so my friend swapped his 1991 305 tpi for a 1991 350 tpi and also dropped a 5 speed. He's got a "painless wiring harness" and everything seems to be working ok, except the car wont start. The fuel pump comes on, it cranks, we're getting spark, but the fuel injectors aren't coming on. We've used some starting fluid (i believe it was some kinda of mixture with ether) and it starts for a few seconds but then it shuts down. He just told me that the chip in the new computer came with a hypertech chip and its says "88 pt# 121 322".. so i looked it up on the hypertech website and the numbers matched for the computer and the car. We tried to get a code but the only code i got was for the vats module, so of course when we disconnect the vats module the code disappears.
Any help will be greatly appreciated. Thanx
Any help will be greatly appreciated. Thanx
#2
Senior Member
Join Date: Dec 2007
Location: Missouri
Posts: 614
Likes: 0
Received 3 Likes
on
2 Posts
Car: Camaro RS
Engine: obd2 350 lt1
Transmission: T56
Axle/Gears: 3.23
Re: swap help
code for vats if im not mistaken it wont start if its not working otherwise its a bad chip seems this happens alot
Thread
Thread Starter
Forum
Replies
Last Post