Confused on the harness!
Thread Starter
Junior Member
Joined: Aug 2007
Posts: 40
Likes: 0
From: B.C.
Car: 1991 Z28
Engine: 350 TPI
Transmission: 4l60e
Confused on the harness!
I bought a 350 tpi to replace the 305 tpi on a 91 z28, almost everything is done and ready to gbe dropped in exept the harness. the harness that came with my 350 is all marked out and stuff, but it looks like some plugs that i need on it are non existant. Aswell I find areas where theres extra plugs for a particular socket. aswell as an area of the harness is cut with 1 section of it completely free from the rest of the harness. i'm wondering, can I use my harness of the 305?
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
What did the 350 come out of?
Your 305 stuff should fit the 350 without any issues. Might as well go back to it and do 350 computer tuning.
Your 305 stuff should fit the 350 without any issues. Might as well go back to it and do 350 computer tuning.
Thread
Thread Starter
Forum
Replies
Last Post
bubbaz28
Suspension and Chassis
10
Sep 18, 2015 02:09 PM