Need some info on engine swap.
Thread Starter
Junior Member
Joined: Feb 2009
Posts: 8
Likes: 0
Need some info on engine swap.
I finally got my motor and trans. I have a 1991 camaro rs, it has a 305tbi in it now. I just purchased a tpi350 motor with the trans, it came out of a 87 camaro. My question is will it bolt right in, or do i have to do some fabrication. The other thing is will I have to buy a new wiring harness and computer or can i Just make the moot carburated?
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
It will bolt in. You'll need TPI harness, ECM, sensors, and fuel pump.
The TPI exhaust was also much better than the exhaust TBI cars had.
The TPI exhaust was also much better than the exhaust TBI cars had.
Thread
Thread Starter
Forum
Replies
Last Post