305 TBI engine swap help!!!
Thread Starter
Junior Member
Joined: Oct 2000
Posts: 55
Likes: 0
From: Westville, IN
305 TBI engine swap help!!!
I'm putting a 327, 425 h.p. sbc into my 92 RS
My question is, what all has to be changed???
If I follow the instructions in the EFI to carb swap, all that really needs to be changed is feul pump/lines, and dist. Is this true??? It also says you don't need the ecm anymore. I thiught my trans. was computer controlled(auto) Can anyone help me out???? thanks.
My question is, what all has to be changed???
If I follow the instructions in the EFI to carb swap, all that really needs to be changed is feul pump/lines, and dist. Is this true??? It also says you don't need the ecm anymore. I thiught my trans. was computer controlled(auto) Can anyone help me out???? thanks.
Senior Member
Joined: Oct 1999
Posts: 6,621
Likes: 2
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
Call up Jegs or Summit, they have a kit that you install and it controls the lockup of our torque conv in 4th gear. Or you could just put a switch in yourself and make it manual.
------------------
, Jon (91 RS too many mods to list)
------------------
, Jon (91 RS too many mods to list)
Thread
Thread Starter
Forum
Replies
Last Post