Engine Swap Everything about swapping an engine into your Third Gen.....be it V6, V8, LTX/LSX, crate engine, etc. Pictures, questions, answers, and work logs.

suggestions on what engine to use

Thread Tools
 
Search this Thread
 
Old Nov 25, 2000 | 12:42 AM
  #1  
DaveZ24's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2000
Posts: 25
Likes: 0
From: Colorado Springs, Colorado
suggestions on what engine to use

I am going to replace the worn V6 in my 84 Bird soon, along with just about everything that will unbolt from the car. But recently decided to use my 400 pontiac engine on another project instead. Now I am looking for an engine that I can drop in to my car. I have a lead on a 89 Formula that is wrecked but the drivetrain is good(the engine still runs)that has been sitting for the last 5 years. I can get the drivetrain whole along with the electronics, would this be a good starting point to build an 11 second, naturally aspirated, street car?

------------------
One Man...One Search...One Goal...MORE POWER!!!!
Just a Nitro guy living in a Nitro world!!!!!
Reply
Old Nov 25, 2000 | 07:10 AM
  #2  
ede's Avatar
ede
TGO Supporter
 
Joined: Aug 1999
Posts: 14,811
Likes: 1
From: Jackson County
if it were me and i was looking at 11s i'd buy a mosher rear, and look at a crate engine as well as a stronger aftermarket trans.

------------------
-=ICON MOTORSPORTS=-
1st & 3rd
Reply
Old Nov 25, 2000 | 09:09 PM
  #3  
DaveZ24's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2000
Posts: 25
Likes: 0
From: Colorado Springs, Colorado
I am trying to do this on a bit of a budget. Not much, but a bit. I would rebuild the engine before putting it in, and upgrade parts as necessary to get the performance I want.
As far as 11's, if I can run 11.95 on a consistent basis, I'd be happy....for now.

------------------
One Man...One Search...One Goal...MORE POWER!!!!
Just a Nitro guy living in a Nitro world!!!!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM
InfinityShade
Transmissions and Drivetrain
15
Aug 22, 2015 08:00 PM
sreZ28
Engine Swap
4
Aug 14, 2015 07:48 PM
bradleydeanuhl
DFI and ECM
4
Aug 12, 2015 11:48 AM




All times are GMT -5. The time now is 07:04 AM.