350 swap in 2 f body w/60degree v6
Thread Starter
Junior Member
Joined: Aug 2009
Posts: 1
Likes: 0
350 swap in 2 f body w/60degree v6
i know it might be me but all i'd like to know is if there are MAJOR mods to do for a 1982 f body 60 degree v6 w/ 200c transmission repalacing with a 350 w a th350 tenasmission.. maybe someone could shed some ligh on this swap?
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.
Step 1 is to read the V6 to V8 swap sticky in the top section of this forum.
The main issue will be the lack of a torque arm mount on the output shaft housing of the TH350. There are a couple of different solutions available, the cheapest being a bracket that uses the output shaft housing bolts to provide that mount.
Step 1 is to read the V6 to V8 swap sticky in the top section of this forum.
The main issue will be the lack of a torque arm mount on the output shaft housing of the TH350. There are a couple of different solutions available, the cheapest being a bracket that uses the output shaft housing bolts to provide that mount.
Thread
Thread Starter
Forum
Replies
Last Post
